Package: iputils-ping
Status: install ok installed
Priority: important
Section: net
Installed-Size: 111
Maintainer: Noah Meyerhans <noahm@debian.org>
Architecture: amd64
Source: iputils
Version: 3:20161105-1
Provides: ping
Depends: libc6 (>= 2.14), libcap2 (>= 1:2.10), libidn11 (>= 1.13), libnettle6
Recommends: libcap2-bin
Description: Tools to test the reachability of network hosts
 The ping command sends ICMP ECHO_REQUEST packets to a host in order to
 test if the host is reachable via the network.
 .
 This package includes a ping6 utility which supports IPv6 network
 connections.

Package: libedit2
Status: install ok installed
Priority: standard
Section: libs
Installed-Size: 241
Maintainer: LLVM Packaging Team <pkg-llvm-team@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: same
Source: libedit
Version: 3.1-20160903-3
Depends: libbsd0 (>= 0.0), libc6 (>= 2.17), libncurses5 (>= 6), libtinfo5 (>= 6)
Description: BSD editline and history libraries
 Command line editor library provides generic line editing,
 history, and tokenization functions.
 .
 It slightly resembles GNU readline.
Homepage: http://www.thrysoee.dk/editline/

Package: python3-cryptography
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 1456
Maintainer: Tristan Seligmann <mithrandi@debian.org>
Architecture: amd64
Source: python-cryptography
Version: 1.7.1-3+deb9u2
Depends: python3 (>= 3~), python3-cffi-backend-api-min (<= 9729), python3-cffi-backend-api-max (>= 9729), python3-idna (>= 2.0), python3-pyasn1 (>= 0.1.8), python3-setuptools (>= 11.3), python3-six (>= 1.4.1), python3:any (>= 3.4~), libc6 (>= 2.4), libssl1.1 (>= 1.1.0)
Suggests: python-cryptography-doc, python3-cryptography-vectors
Breaks: python3-openssl (<< 16.0.0)
Description: Python library exposing cryptographic recipes and primitives (Python 3)
 The cryptography library is designed to be a "one-stop-shop" for
 all your cryptographic needs in Python.
 .
 As an alternative to the libraries that came before it, cryptography
 tries to address some of the issues with those libraries:
  - Lack of PyPy and Python 3 support.
  - Lack of maintenance.
  - Use of poor implementations of algorithms (i.e. ones with known
    side-channel attacks).
  - Lack of high level, "Cryptography for humans", APIs.
  - Absence of algorithms such as AES-GCM.
  - Poor introspectability, and thus poor testability.
  - Extremely error prone APIs, and bad defaults.
 .
 This package contains the Python 3 version of cryptography.
Homepage: https://cryptography.io/

Package: libpam-runtime
Status: install ok installed
Priority: required
Section: admin
Installed-Size: 1016
Maintainer: Steve Langasek <vorlon@debian.org>
Architecture: all
Multi-Arch: foreign
Source: pam
Version: 1.1.8-3.6
Replaces: libpam0g-dev, libpam0g-util
Depends: debconf (>= 0.5) | debconf-2.0, debconf (>= 1.5.19) | cdebconf, libpam-modules (>= 1.0.1-6)
Conflicts: libpam0g-util
Conffiles:
 /etc/pam.conf 87fc76f18e98ee7d3848f6b81b3391e5
 /etc/pam.d/other 31aa7f2181889ffb00b87df4126d1701
Description: Runtime support for the PAM library
 Contains configuration files and  directories required for
 authentication  to work on Debian systems.  This package is required
 on almost all installations.
Homepage: http://www.linux-pam.org/

Package: libncurses5
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 287
Maintainer: Craig Small <csmall@debian.org>
Architecture: amd64
Multi-Arch: same
Source: ncurses
Version: 6.0+20161126-1+deb9u2
Depends: libtinfo5 (= 6.0+20161126-1+deb9u2), libc6 (>= 2.14)
Recommends: libgpm2
Description: shared libraries for terminal handling
 The ncurses library routines are a terminal-independent method of
 updating character screens with reasonable optimization.
 .
 This package contains the shared libraries necessary to run programs
 compiled with ncurses.
Homepage: http://invisible-island.net/ncurses/

Package: python3.5
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 321
Maintainer: Matthias Klose <doko@debian.org>
Architecture: amd64
Multi-Arch: allowed
Version: 3.5.3-1+deb9u3
Depends: python3.5-minimal (= 3.5.3-1+deb9u3), libpython3.5-stdlib (= 3.5.3-1+deb9u3), mime-support
Suggests: python3.5-venv, python3.5-doc, binutils
Description: Interactive high-level object-oriented language (version 3.5)
 Python is a high-level, interactive, object-oriented language. Its 3.5 version
 includes an extensive class library with lots of goodies for
 network programming, system administration, sounds and graphics.

Package: libpython3-stdlib
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 36
Maintainer: Matthias Klose <doko@debian.org>
Architecture: amd64
Multi-Arch: same
Source: python3-defaults
Version: 3.5.3-1
Depends: libpython3.5-stdlib (>= 3.5.3-1~)
Description: interactive high-level object-oriented language (default python3 version)
 Python, the high-level, interactive object oriented language,
 includes an extensive class library with lots of goodies for
 network programming, system administration, sounds and graphics.
 .
 This package is a dependency package, which depends on Debian's default
 Python 3 version (currently v3.5).
Homepage: http://www.python.org/

Package: libapt-pkg5.0
Status: install ok installed
Priority: important
Section: libs
Installed-Size: 3056
Maintainer: APT Development Team <deity@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: apt
Version: 1.4.11
Provides: libapt-pkg (= 1.4.11)
Depends: libbz2-1.0, libc6 (>= 2.15), libgcc1 (>= 1:3.0), liblz4-1 (>= 0.0~r127), liblzma5 (>= 5.1.1alpha+20120614), libstdc++6 (>= 5.2), zlib1g (>= 1:1.2.2.3)
Recommends: apt (>= 1.4.11)
Breaks: appstream (<< 0.9.0-3~), apt (<< 1.1~exp14), libapt-inst1.5 (<< 0.9.9~)
Description: package management runtime library
 This library provides the common functionality for searching and
 managing packages as well as information about packages.
 Higher-level package managers can depend upon this library.
 .
 This includes:
  * retrieval of information about packages from multiple sources
  * retrieval of packages and all dependent packages
    needed to satisfy a request either through an internal
    solver or by interfacing with an external one
  * authenticating the sources and validating the retrieved data
  * installation and removal of packages in the system
  * providing different transports to retrieve data over cdrom, ftp,
    http, rsh as well as an interface to add more transports like
    https (apt-transport-https) and debtorrent (apt-transport-debtorrent).

Package: libaudit1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 150
Maintainer: Laurent Bigonville <bigon@debian.org>
Architecture: amd64
Multi-Arch: same
Source: audit
Version: 1:2.6.7-2
Depends: libaudit-common (>= 1:2.6.7-2), libc6 (>= 2.14), libcap-ng0
Description: Dynamic library for security auditing
 The audit-libs package contains the dynamic libraries needed for
 applications to use the audit framework. It is used to monitor systems for
 security related events.
Homepage: https://people.redhat.com/sgrubb/audit/

Package: readline-common
Status: install ok installed
Priority: important
Section: utils
Installed-Size: 89
Maintainer: Matthias Klose <doko@debian.org>
Architecture: all
Multi-Arch: foreign
Source: readline
Version: 7.0-3
Replaces: libreadline-common, libreadline4 (<< 4.3-16), libreadline5 (<< 5.0-11)
Depends: dpkg (>= 1.15.4) | install-info
Suggests: readline-doc
Conflicts: libreadline-common, libreadline5 (<< 5.0-11)
Description: GNU readline and history libraries, common files
 The GNU readline library aids in the consistency of user interface
 across discrete programs that need to provide a command line
 interface.
 .
 The GNU history library provides a consistent user interface for
 recalling lines of previously typed input.

Package: python3-yaml
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 443
Maintainer: Debian Python Modules Team <python-modules-team@lists.alioth.debian.org>
Architecture: amd64
Source: pyyaml
Version: 3.12-1
Depends: python3 (<< 3.6), python3 (>= 3.5~), python3:any (>= 3.3.2-2~), libc6 (>= 2.14), libyaml-0-2
Description: YAML parser and emitter for Python3
 Python3-yaml is a complete YAML 1.1 parser and emitter for Python3.  It can
 parse all examples from the specification. The parsing algorithm is simple
 enough to be a reference for YAML parser implementors. A simple extension API
 is also provided.  The package is built using libyaml for improved speed.
Homepage: https://github.com/yaml/pyyaml

Package: ncurses-term
Status: install ok installed
Priority: standard
Section: misc
Installed-Size: 4025
Maintainer: Craig Small <csmall@debian.org>
Architecture: all
Multi-Arch: foreign
Source: ncurses
Version: 6.0+20161126-1+deb9u2
Replaces: bogl-bterm (<< 0.1.18-7), mlterm-common (<< 3.0.2-1), ncurses-base (<< 5.7+20100313-1), suckless-tools (<< 39)
Breaks: bogl-bterm (<< 0.1.18-7), mlterm-common (<< 3.0.2-1), suckless-tools (<< 39)
Description: additional terminal type definitions
 The ncurses library routines are a terminal-independent method of
 updating character screens with reasonable optimization.
 .
 This package contains all of the numerous terminal definitions not found in
 the ncurses-base package.
Homepage: http://invisible-island.net/ncurses/

Package: cloud-guest-utils
Status: install ok installed
Priority: extra
Section: admin
Installed-Size: 58
Maintainer: Tiago Ilieve <tiago.myhro@gmail.com>
Architecture: all
Source: cloud-utils
Version: 0.29-1
Replaces: cloud-utils (<< 0.28~bzr281)
Depends: e2fsprogs (>= 1.4), util-linux (>= 2.17.2), python3:any
Recommends: gdisk | util-linux (>= 2.26.3)
Suggests: cloud-init
Breaks: cloud-utils (<< 0.28~bzr281)
Description: cloud guest utilities
 This package contains programs useful inside cloud instance.
 It contains 'growpart' for resizing a partition during boot, which is normally
 done with the aid of cloud-init.
Homepage: https://launchpad.net/cloud-utils

Package: libtinfo5
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 478
Maintainer: Craig Small <csmall@debian.org>
Architecture: amd64
Multi-Arch: same
Source: ncurses
Version: 6.0+20161126-1+deb9u2
Replaces: libncurses5 (<< 5.9-3)
Depends: libc6 (>= 2.16)
Breaks: dialog (<< 1.2-20130523)
Description: shared low-level terminfo library for terminal handling
 The ncurses library routines are a terminal-independent method of
 updating character screens with reasonable optimization.
 .
 This package contains the shared low-level terminfo library.
Homepage: http://invisible-island.net/ncurses/

Package: perl-base
Essential: yes
Status: install ok installed
Priority: required
Section: perl
Installed-Size: 7551
Maintainer: Niko Tyni <ntyni@debian.org>
Architecture: amd64
Source: perl
Version: 5.24.1-3+deb9u7
Replaces: libfile-path-perl (<< 2.12.01), libfile-temp-perl (<< 0.2304), libio-socket-ip-perl (<< 0.37), libscalar-list-utils-perl (<< 1:1.42.02), libsocket-perl (<< 2.020.03), libxsloader-perl (<< 0.22), perl (<< 5.10.1-12), perl-modules (<< 5.20.1-3)
Provides: libfile-path-perl, libfile-temp-perl, libio-socket-ip-perl, libscalar-list-utils-perl, libsocket-perl, libxsloader-perl, perlapi-5.24.1
Pre-Depends: libc6 (>= 2.23), dpkg (>= 1.17.17)
Suggests: perl
Breaks: amanda-common (<< 1:3.3.9-2), autoconf2.13 (<< 2.13-45), backuppc (<< 3.3.1-2), dh-haskell (<< 0.3), libalien-wxwidgets-perl (<< 0.65+dfsg-2), libanyevent-perl (<< 7.070-2), libcommon-sense-perl (<< 3.72-2~), libexception-class-perl (<< 1.42), libfile-path-perl (<< 2.12.01), libfile-spec-perl (<< 3.6301), libfile-temp-perl (<< 0.2304), libgtk2-perl-doc (<< 2:1.2491-4), libio-socket-ip-perl (<< 0.37), libjcode-perl (<< 2.13-3), libmarc-charset-perl (<< 1.2), libsbuild-perl (<< 0.67.0-1), libscalar-list-utils-perl (<< 1:1.42.02), libsocket-perl (<< 2.020.03), libxsloader-perl (<< 0.22), mailagent (<< 1:3.1-81-2), pdl (<< 1:2.007-4), perl (<< 5.24.1~), perl-modules (<< 5.24.1~), texinfo (<< 6.1.0.dfsg.1-8)
Conflicts: defoma (<< 0.11.12), doc-base (<< 0.10.3), mono-gac (<< 2.10.8.1-3), safe-rm (<< 0.8), update-inetd (<< 4.41)
Description: minimal Perl system
 Perl is a scripting language used in many system scripts and utilities.
 .
 This package provides a Perl interpreter and the small subset of the
 standard run-time library required to perform basic tasks. For a full
 Perl installation, install "perl" (and its dependencies, "perl-modules-5.24"
 and "perl-doc").
Homepage: http://dev.perl.org/perl5/

Package: libudev1
Status: install ok installed
Priority: important
Section: libs
Installed-Size: 224
Maintainer: Debian systemd Maintainers <pkg-systemd-maintainers@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: same
Source: systemd
Version: 232-25+deb9u12
Depends: libc6 (>= 2.16)
Description: libudev shared library
 This library provides access to udev device information.
Homepage: https://www.freedesktop.org/wiki/Software/systemd

Package: libnettle6
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 358
Maintainer: Magnus Holmgren <holmgren@debian.org>
Architecture: amd64
Multi-Arch: same
Source: nettle (3.3-1)
Version: 3.3-1+b2
Depends: libc6 (>= 2.14)
Description: low level cryptographic library (symmetric and one-way cryptos)
 Nettle is a cryptographic library that is designed to fit easily in more or
 less any context: In crypto toolkits for object-oriented languages (C++,
 Python, Pike, ...), in applications like LSH or GNUPG, or even in kernel
 space.
 .
 It tries to solve a problem of providing a common set of cryptographic
 algorithms for higher-level applications by implementing a
 context-independent set of cryptographic algorithms. In that light, Nettle
 doesn't do any memory allocation or I/O, it simply provides the
 cryptographic algorithms for the application to use in any environment and
 in any way it needs.
 .
 This package contains the symmetric and one-way cryptographic
 algorithms. To avoid having this package depend on libgmp, the
 asymmetric cryptos reside in a separate library, libhogweed.
Homepage: http://www.lysator.liu.se/~nisse/nettle/

Package: eatmydata
Status: install ok installed
Priority: optional
Section: utils
Installed-Size: 27
Maintainer: Mattia Rizzolo <mattia@debian.org>
Architecture: all
Source: libeatmydata
Version: 105-5
Depends: libeatmydata1 (>= 105-5)
Description: Library and utilities designed to disable fsync and friends
 This package contains a small LD_PRELOAD library (libeatmydata) and a couple
 of helper utilities designed to transparently disable fsync and friends (like
 open(O_SYNC)). This has two side-effects: making software that writes data
 safely to disk a lot quicker and making this software no longer crash safe.
 .
 You will find eatmydata useful if particular software calls fsync(), sync()
 etc. frequently but the data it stores is not that valuable to you and you may
 afford losing it in case of system crash. Data-to-disk synchronization calls
 are typically very slow on modern file systems and their extensive usage might
 slow down software significantly. It does not make sense to accept such a hit
 in performance if data being manipulated is not very important.
 .
 On the other hand, do not use eatmydata when you care about what software
 stores or it manipulates important components of your system. The library is
 called libEAT-MY-DATA for a reason.
Homepage: https://launchpad.net/libeatmydata

Package: libpopt0
Status: install ok installed
Priority: important
Section: libs
Installed-Size: 224
Maintainer: Paul Martin <pm@debian.org>
Architecture: amd64
Multi-Arch: same
Source: popt (1.16-10)
Version: 1.16-10+b2
Replaces: popt
Depends: libc6 (>= 2.17)
Conflicts: libpopt-dev (<= 1.4-1), popt, rpm (<= 4.0.2-3)
Description: lib for parsing cmdline parameters
 Popt was heavily influenced by the getopt() and getopt_long() functions,
 but it allows more powerful argument expansion. It can parse arbitrary
 argv[] style arrays and automatically set variables based on command
 line arguments. It also allows command line arguments to be aliased via
 configuration files and includes utility functions for parsing arbitrary
 strings into argv[] arrays using shell-like rules.
 .
 This package contains the runtime library and locale data.
Homepage: http://rpm5.org/

Package: libattr1
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 42
Maintainer: Anibal Monsalve Salazar <anibal@debian.org>
Architecture: amd64
Multi-Arch: same
Source: attr (1:2.4.47-2)
Version: 1:2.4.47-2+b2
Depends: libc6 (>= 2.4)
Conflicts: attr (<< 2.0.0)
Description: Extended attribute shared library
 Contains the runtime environment required by programs that make use
 of extended attributes.
Homepage: http://savannah.nongnu.org/projects/attr/

Package: libk5crypto3
Status: install ok installed
Priority: standard
Section: libs
Installed-Size: 311
Maintainer: Sam Hartman <hartmans@debian.org>
Architecture: amd64
Multi-Arch: same
Source: krb5
Version: 1.15-1+deb9u2
Depends: libc6 (>= 2.14), libkeyutils1 (>= 1.4), libkrb5support0 (>= 1.15~beta1)
Suggests: krb5-doc, krb5-user
Breaks: libgssapi-krb5-2 (<= 1.10+dfsg~alpha1), libkrb5-3 (<= 1.8~aa)
Description: MIT Kerberos runtime libraries - Crypto Library
 Kerberos is a system for authenticating users and services on a network.
 Kerberos is a trusted third-party service.  That means that there is a
 third party (the Kerberos server) that is trusted by all the entities on
 the network (users and services, usually called "principals").
 .
 This is the MIT reference implementation of Kerberos V5.
 .
 This package contains the runtime cryptography libraries used by
 applications and Kerberos clients.
Homepage: http://web.mit.edu/kerberos/

Package: libss2
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 96
Maintainer: Theodore Y. Ts'o <tytso@mit.edu>
Architecture: amd64
Multi-Arch: same
Source: e2fsprogs
Version: 1.43.4-2+deb9u2
Replaces: e2fsprogs (<< 1.34-1)
Depends: libcomerr2, libc6 (>= 2.17)
Description: command-line interface parsing library
 libss provides a simple command-line interface parser which will
 accept input from the user, parse the command into an argv argument
 vector, and then dispatch it to a handler function.
 .
 It was originally inspired by the Multics SubSystem library.
Homepage: http://e2fsprogs.sourceforge.net

Package: libexpat1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 369
Maintainer: Laszlo Boszormenyi (GCS) <gcs@debian.org>
Architecture: amd64
Multi-Arch: same
Source: expat
Version: 2.2.0-2+deb9u3
Depends: libc6 (>= 2.14)
Conflicts: wink (<= 1.5.1060-4)
Description: XML parsing C library - runtime library
 This package contains the runtime, shared library of expat, the C
 library for parsing XML. Expat is a stream-oriented parser in
 which an application registers handlers for things the parser
 might find in the XML document (like start tags).
Homepage: http://expat.sourceforge.net

Package: liblzma5
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 339
Maintainer: Jonathan Nieder <jrnieder@gmail.com>
Architecture: amd64
Multi-Arch: same
Source: xz-utils (5.2.2-1.2)
Version: 5.2.2-1.2+b1
Depends: libc6 (>= 2.17)
Description: XZ-format compression library
 XZ is the successor to the Lempel-Ziv/Markov-chain Algorithm
 compression format, which provides memory-hungry but powerful
 compression (often better than bzip2) and fast, easy decompression.
 .
 The native format of liblzma is XZ; it also supports raw (headerless)
 streams and the older LZMA format used by lzma. (For 7-Zip's related
 format, use the p7zip package instead.)
Homepage: http://tukaani.org/xz/

Package: libpam-systemd
Status: install ok installed
Priority: standard
Section: admin
Installed-Size: 370
Maintainer: Debian systemd Maintainers <pkg-systemd-maintainers@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: same
Source: systemd
Version: 232-25+deb9u12
Depends: libc6 (>= 2.17), libpam0g (>= 0.99.7.1), libselinux1 (>= 2.1.9), systemd (= 232-25+deb9u12), libpam-runtime (>= 1.0.1-6), dbus, systemd-shim (>= 10-3~) | systemd-sysv
Description: system and service manager - PAM module
 This package contains the PAM module which registers user sessions in
 the systemd control group hierarchy for logind.
 .
 If in doubt, do install this package.
 .
 Packages that depend on logind functionality need to depend on libpam-systemd.
Homepage: https://www.freedesktop.org/wiki/Software/systemd

Package: libpam-modules-bin
Status: install ok installed
Priority: required
Section: admin
Installed-Size: 220
Maintainer: Steve Langasek <vorlon@debian.org>
Architecture: amd64
Multi-Arch: foreign
Source: pam
Version: 1.1.8-3.6
Replaces: libpam-modules (<< 1.1.3-8)
Depends: libaudit1 (>= 1:2.2.1), libc6 (>= 2.14), libpam0g (>= 0.99.7.1), libselinux1 (>= 1.32)
Description: Pluggable Authentication Modules for PAM - helper binaries
 This package contains helper binaries used by the standard set of PAM
 modules in the libpam-modules package.
Homepage: http://www.linux-pam.org/

Package: libip4tc0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 110
Maintainer: Arturo Borrero Gonzalez <arturo@debian.org>
Architecture: amd64
Multi-Arch: same
Source: iptables
Version: 1.6.0+snapshot20161117-6
Depends: libc6 (>= 2.14)
Description: netfilter libip4tc library
 The user-space iptables (IPv4) C library from the Netfilter xtables framework.
 .
 iptables IPv4 ruleset ADT and kernel interface.
 .
 This library has been considered private for years (and still is), in the
 sense of changing symbols and backward compatibility not guaranteed.
Homepage: http://www.netfilter.org/

Package: libpam-cap
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 40
Maintainer: Christian Kastner <ckk@debian.org>
Architecture: amd64
Multi-Arch: same
Source: libcap2
Version: 1:2.25-1
Replaces: libcap2-bin (<< 1:2.22-1.1)
Depends: libc6 (>= 2.14), libcap2 (>= 1:2.10), libpam0g (>= 0.99.7.1), libpam-runtime (>= 1.1.3-2~)
Breaks: libcap2-bin (<< 1:2.22-1.1)
Conffiles:
 /etc/security/capability.conf fa5804a90b16addeec23008102b4746d
Description: POSIX 1003.1e capabilities (PAM module)
 Libcap implements the user-space interfaces to the POSIX 1003.1e capabilities
 available in Linux kernels. These capabilities are a partitioning of the all
 powerful root privilege into a set of distinct privileges.
 .
 This package contains the PAM module for enforcing capabilities on users and
 groups at PAM session start time.
Homepage: http://sites.google.com/site/fullycapable/

Package: grep
Essential: yes
Status: install ok installed
Priority: required
Section: utils
Installed-Size: 1131
Maintainer: Anibal Monsalve Salazar <anibal@debian.org>
Architecture: amd64
Multi-Arch: foreign
Version: 2.27-2
Provides: rgrep
Depends: dpkg (>= 1.15.4) | install-info
Pre-Depends: libc6 (>= 2.14), libpcre3
Suggests: libpcre3 (>= 7.7)
Conflicts: rgrep
Description: GNU grep, egrep and fgrep
 'grep' is a utility to search for text in files; it can be used from the
 command line or in scripts.  Even if you don't want to use it, other packages
 on your system probably will.
 .
 The GNU family of grep utilities may be the "fastest grep in the west".
 GNU grep is based on a fast lazy-state deterministic matcher (about
 twice as fast as stock Unix egrep) hybridized with a Boyer-Moore-Gosper
 search for a fixed string that eliminates impossible text from being
 considered by the full regexp matcher without necessarily having to
 look at every character. The result is typically many times faster
 than Unix grep or egrep. (Regular expressions containing backreferencing
 will run more slowly, however.)
Homepage: http://www.gnu.org/software/grep/

Package: ifupdown
Status: install ok installed
Priority: important
Section: admin
Installed-Size: 195
Maintainer: Guus Sliepen <guus@debian.org>
Architecture: amd64
Multi-Arch: foreign
Version: 0.8.19
Replaces: systemd (<< 228-3~)
Depends: libc6 (>= 2.14), init-system-helpers (>= 1.18~), lsb-base, adduser, iproute2
Recommends: isc-dhcp-client | dhcp-client
Suggests: ppp, rdnssd
Breaks: systemd (<< 228-3~)
Conffiles:
 /etc/default/networking 35cd4a2713981c9239ce4532c1bfc1c7
 /etc/init.d/networking 27013efdfe13470845c70a9e00a61fde
 /etc/init/network-interface-container.conf 4daa570594afc50940f140a7731d20d1
 /etc/init/network-interface-security.conf feb6b4b52fe24c44ff1bc68addf245d6
 /etc/init/network-interface.conf aae12345eba8e946579b06798b1752c1
 /etc/init/networking.conf c50811e19bcd596d99b0467b40cfbb8b
 /etc/network/if-down.d/upstart 1a0205ddbc1446782a8d4d818e97d8a5
 /etc/network/if-up.d/upstart dfbcde4fd4a3a2553930605e03e160ab
Description: high level tools to configure network interfaces
 This package provides the tools ifup and ifdown which may be used to
 configure (or, respectively, deconfigure) network interfaces based on
 interface definitions in the file /etc/network/interfaces.

Package: psmisc
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 589
Maintainer: Craig Small <csmall@debian.org>
Architecture: amd64
Multi-Arch: foreign
Source: psmisc (22.21-2.1)
Version: 22.21-2.1+b2
Replaces: procps (<< 1:1.2)
Depends: libc6 (>= 2.14), libselinux1 (>= 1.32), libtinfo5 (>= 6)
Description: utilities that use the proc file system
 This package contains miscellaneous utilities that use the proc FS:
 .
  - fuser: identifies processes that are using files or sockets.
  - killall: kills processes by name (e.g. "killall -HUP named").
  - peekfd: shows the data traveling over a file descriptor.
  - pstree: shows currently running processes as a tree.
  - prtstat: print the contents of /proc/<pid>/stat
Homepage: http://psmisc.sf.net/

Package: base-passwd
Essential: yes
Status: install ok installed
Priority: required
Section: admin
Installed-Size: 229
Maintainer: Colin Watson <cjwatson@debian.org>
Architecture: amd64
Multi-Arch: foreign
Version: 3.5.43
Replaces: base
Depends: libc6 (>= 2.8), libdebconfclient0 (>= 0.145)
Recommends: debconf (>= 0.5) | debconf-2.0
Description: Debian base system master password and group files
 These are the canonical master copies of the user database files
 (/etc/passwd and /etc/group), containing the Debian-allocated user and
 group IDs. The update-passwd tool is provided to keep the system databases
 synchronized with these master files.

Package: libisc-export160
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 603
Maintainer: Debian DNS Packaging <pkg-dns-devel@lists.alioth.debian.org>
Architecture: amd64
Source: bind9
Version: 1:9.10.3.dfsg.P4-12.3+deb9u8
Depends: libc6 (>= 2.14)
Description: Exported ISC Shared Library
 The Berkeley Internet Name Domain (BIND) implements an Internet domain
 name server.  BIND is the most widely-used name server software on the
 Internet, and is supported by the Internet Software Consortium, www.isc.org.
 .
 This package delivers the exported libisc shared library.

Package: e2fslibs
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 450
Maintainer: Theodore Y. Ts'o <tytso@mit.edu>
Architecture: amd64
Multi-Arch: same
Source: e2fsprogs
Version: 1.43.4-2+deb9u2
Replaces: e2fsprogs (<< 1.34-1)
Provides: libe2p2, libext2fs2
Depends: libc6 (>= 2.17)
Description: ext2/ext3/ext4 file system libraries
 The ext2, ext3 and ext4 file systems are successors of the original ext
 ("extended") file system. They are the main file system types used for
 hard disks on Debian and other Linux systems.
 .
 This package provides the ext2fs and e2p libraries, for userspace software
 that directly accesses extended file systems. Programs that use libext2fs
 include e2fsck, mke2fs, and tune2fs. Programs that use libe2p include
 dumpe2fs, chattr, and lsattr.
Homepage: http://e2fsprogs.sourceforge.net

Package: liblz4-1
Status: install ok installed
Priority: extra
Section: libs
Installed-Size: 93
Maintainer: Nobuhiro Iwamatsu <iwamatsu@debian.org>
Architecture: amd64
Multi-Arch: same
Source: lz4 (0.0~r131-2)
Version: 0.0~r131-2+b1
Depends: libc6 (>= 2.14)
Description: Fast LZ compression algorithm library - runtime
 LZ4 is a very fast lossless compression algorithm, providing compression speed
 at 400 MB/s per core, scalable with multi-cores CPU. It also features an
 extremely fast decoder, with speed in multiple GB/s per core, typically
 reaching RAM speed limits on multi-core systems.
 .
 This package includes the shared library.
Homepage: https://github.com/Cyan4973/lz4

Package: libxext6
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 124
Maintainer: Debian X Strike Force <debian-x@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: libxext (2:1.3.3-1)
Version: 2:1.3.3-1+b2
Depends: libc6 (>= 2.14), libx11-6 (>= 2:1.6.0)
Description: X11 miscellaneous extension library
 libXext provides an X Window System client interface to several extensions to
 the X protocol.
 .
 The supported protocol extensions are:
  - DOUBLE-BUFFER (DBE), the Double Buffer extension;
  - DPMS, the VESA Display Power Management System extension;
  - Extended-Visual-Information (EVI), an extension for gathering extra
    information about the X server's visuals;
  - LBX, the Low Bandwidth X extension;
  - MIT-SHM, the MIT X client/server shared memory extension;
  - MIT-SUNDRY-NONSTANDARD, a miscellaneous extension by MIT;
  - Multi-Buffering, the multi-buffering and stereo display extension;
  - SECURITY, the X security extension;
  - SHAPE, the non-rectangular shaped window extension;
  - SYNC, the X synchronization extension;
  - TOG-CUP, the Open Group's Colormap Utilization extension;
  - XC-APPGROUP, the X Consortium's Application Group extension;
  - XC-MISC, the X Consortium's resource ID querying extension;
  - XTEST, the X test extension (this is one of two client-side
    implementations; the other is in the libXtst library, provided by the
    libxtst6 package);
 .
 libXext also provides a small set of utility functions to aid authors of
 client APIs for X protocol extensions.
 .
 More information about X.Org can be found at:
 <URL:http://www.X.org>
 .
 This module can be found at
 git://anongit.freedesktop.org/git/xorg/lib/libXext

Package: dialog
Status: install ok installed
Priority: optional
Section: misc
Installed-Size: 1111
Maintainer: Santiago Vila <sanvila@debian.org>
Architecture: amd64
Version: 1.3-20160828-2
Provides: libdialog-dev
Depends: libc6 (>= 2.15), libncursesw5 (>= 6), libtinfo5 (>= 6), debianutils (>= 1.6)
Description: Displays user-friendly dialog boxes from shell scripts
 This application provides a method of displaying several different types
 of dialog boxes from shell scripts.  This allows a developer of a script
 to interact with the user in a much friendlier manner.
 .
 The following types of boxes are at your disposal:
  yes/no           Typical query style box with "Yes" and "No" answer buttons
  menu             A scrolling list of menu choices with single entry selection
  input            Query style box with text entry field
  message          Similar to the yes/no box, but with only an "Ok" button
  text             A scrollable text box that works like a simple file viewer
  info             A message display that allows asynchronous script execution
  checklist        Similar to the menu box, but allowing multiple selections
  radiolist        Checklist style box allowing single selections
  gauge            Typical "progress report" style box
  tail             Allows viewing the end of files (tail) that auto updates
  background tail  Similar to tail but runs in the background.
  editbox          Allows editing an existing file
Homepage: http://invisible-island.net/dialog/dialog.html

Package: debianutils
Essential: yes
Status: install ok installed
Priority: required
Section: utils
Installed-Size: 213
Maintainer: Clint Adams <clint@debian.org>
Architecture: amd64
Multi-Arch: foreign
Version: 4.8.1.1
Replaces: manpages-pl (<< 1:0.5)
Depends: sensible-utils
Pre-Depends: libc6 (>= 2.15)
Description: Miscellaneous utilities specific to Debian
 This package provides a number of small utilities which are used
 primarily by the installation scripts of Debian packages, although
 you may use them directly.
 .
 The specific utilities included are:
 add-shell installkernel ischroot remove-shell run-parts savelog
 tempfile which

Package: mime-support
Status: install ok installed
Priority: standard
Section: net
Installed-Size: 110
Maintainer: Mime-Support Maintainers <mime-support@plessy.org>
Architecture: all
Multi-Arch: foreign
Version: 3.60
Recommends: bzip2, file, xz-utils
Conffiles:
 /etc/mime.types 4561fade4c4fc48e526e72871c470eec
 /etc/mailcap.order ba07e08a7fe3741d0b8339127963190e
Description: MIME files 'mime.types' & 'mailcap', and support programs
 As these files can be used by all MIME compliant programs, they
 have been moved into their own package that others can depend upon.
 .
 Other packages add themselves as viewers/editors/composers/etc by
 using the provided "update-mime" program.
 .
 In addition, the commands "see", "edit", "compose", and "print"
 will display, alter, create, and print (respectively) any file using
 a program determined from the entries in the mime.types and mailcap
 files.

Package: python3
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 67
Maintainer: Matthias Klose <doko@debian.org>
Architecture: amd64
Multi-Arch: allowed
Source: python3-defaults
Version: 3.5.3-1
Replaces: python3-minimal (<< 3.1.2-2)
Provides: python3-profiler
Depends: python3.5 (>= 3.5.3-1~), libpython3-stdlib (= 3.5.3-1), dh-python
Pre-Depends: python3-minimal (= 3.5.3-1)
Suggests: python3-doc (>= 3.5.3-1), python3-tk (>= 3.5.3-1~), python3-venv (>= 3.5.3-1)
Description: interactive high-level object-oriented language (default python3 version)
 Python, the high-level, interactive object oriented language,
 includes an extensive class library with lots of goodies for
 network programming, system administration, sounds and graphics.
 .
 This package is a dependency package, which depends on Debian's default
 Python 3 version (currently v3.5).
Homepage: http://www.python.org/

Package: python3-cffi-backend
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 183
Maintainer: Debian Python Modules Team <python-modules-team@lists.alioth.debian.org>
Architecture: amd64
Source: python-cffi
Version: 1.9.1-2
Replaces: python3-cffi (<< 1)
Provides: python3-cffi-backend-api-9729, python3-cffi-backend-api-max (= 10239), python3-cffi-backend-api-min (= 9729)
Depends: python3 (<< 3.6), python3 (>= 3.5~), python3:any (>= 3.1~), libc6 (>= 2.14), libffi6 (>= 3.0.4)
Breaks: python3-cffi (<< 1)
Description: Foreign Function Interface for Python 3 calling C code - runtime
 Convenient and reliable way of calling C code from Python 3.
 .
 The aim of this project is to provide a convenient and reliable way of calling
 C code from Python. It keeps Python logic in Python, and minimises the C
 required. It is able to work at either the C API or ABI level, unlike most
 other approaches, that only support the ABI level.
 .
 This package contains the runtime support for pre-built cffi modules.
Homepage: http://cffi.readthedocs.org/

Package: libgcrypt20
Status: install ok installed
Priority: standard
Section: libs
Installed-Size: 1266
Maintainer: Debian GnuTLS Maintainers <pkg-gnutls-maint@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: same
Version: 1.7.6-2+deb9u3
Depends: libc6 (>= 2.15), libgpg-error0 (>= 1.14)
Suggests: rng-tools
Description: LGPL Crypto library - runtime library
 libgcrypt contains cryptographic functions.  Many important free
 ciphers, hash algorithms and public key signing algorithms have been
 implemented:
 .
 Arcfour, Blowfish, CAST5, DES, AES, Twofish, Serpent, rfc2268 (rc2), SEED,
 Poly1305, Camellia, ChaCha20, IDEA, Salsa, CRC, MD2, MD4, MD5, RIPE-MD160,
 SHA-1, SHA-256, SHA-512, SHA3-224, SHA3-256, SHA3-384, SHA3-512, SHAKE128,
 SHAKE256 Tiger, Whirlpool, DSA, DSA2, ElGamal, RSA, ECC (Curve25519,
 sec256k1, GOST R 34.10-2001 and GOST R 34.10-2012, etc.)
Homepage: http://directory.fsf.org/project/libgcrypt/

Package: xxd
Status: install ok installed
Priority: extra
Section: editors
Installed-Size: 168
Maintainer: Debian Vim Maintainers <pkg-vim-maintainers@lists.alioth.debian.org>
Architecture: amd64
Source: vim
Version: 2:8.0.0197-4+deb9u3
Replaces: vim-common (<< 2:7.4.2347-1~)
Depends: libc6 (>= 2.3.4)
Breaks: vim-common (<< 2:7.4.2347-1~)
Description: tool to make (or reverse) a hex dump
 xxd creates a hex dump of a given file or standard input.  It can also convert
 a hex dump back to its original binary form.
Homepage: http://www.vim.org/

Package: sudo
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 3034
Maintainer: Bdale Garbee <bdale@gag.com>
Architecture: amd64
Version: 1.8.19p1-2.1+deb9u3
Replaces: sudo-ldap
Depends: libaudit1 (>= 1:2.2.1), libc6 (>= 2.17), libpam0g (>= 0.99.7.1), libselinux1 (>= 1.32), libpam-modules, lsb-base
Conflicts: sudo-ldap
Conffiles:
 /etc/init.d/sudo 69497d0565055f626ee2bc84f818ce0f
 /etc/pam.d/sudo 85da64f888739f193fc0fa896680030e
 /etc/sudoers 45437b4e86fba2ab890ac81db2ec3606
 /etc/sudoers.d/README 8d3cf36d1713f40a0ddc38e1b21a51b6
Description: Provide limited super user privileges to specific users
 Sudo is a program designed to allow a sysadmin to give limited root
 privileges to users and log root activity.  The basic philosophy is to give
 as few privileges as possible but still allow people to get their work done.
 .
 This version is built with minimal shared library dependencies, use the
 sudo-ldap package instead if you need LDAP support for sudoers.
Homepage: http://www.sudo.ws/

Package: libncursesw5
Status: install ok installed
Priority: important
Section: libs
Installed-Size: 347
Maintainer: Craig Small <csmall@debian.org>
Architecture: amd64
Multi-Arch: same
Source: ncurses
Version: 6.0+20161126-1+deb9u2
Depends: libtinfo5 (= 6.0+20161126-1+deb9u2), libc6 (>= 2.14)
Recommends: libgpm2
Description: shared libraries for terminal handling (wide character support)
 The ncurses library routines are a terminal-independent method of
 updating character screens with reasonable optimization.
 .
 This package contains the shared libraries necessary to run programs
 compiled with ncursesw, which includes support for wide characters.
Homepage: http://invisible-island.net/ncurses/

Package: bash
Essential: yes
Status: install ok installed
Priority: required
Section: shells
Installed-Size: 5798
Maintainer: Matthias Klose <doko@debian.org>
Architecture: amd64
Multi-Arch: foreign
Version: 4.4-5
Replaces: bash-completion (<< 20060301-0), bash-doc (<= 2.05-1)
Depends: base-files (>= 2.1.12), debianutils (>= 2.15)
Pre-Depends: dash (>= 0.5.5.1-2.2), libc6 (>= 2.15), libtinfo5 (>= 6)
Recommends: bash-completion (>= 20060301-0)
Suggests: bash-doc
Conflicts: bash-completion (<< 20060301-0)
Conffiles:
 /etc/bash.bashrc 87b895cef45b8090d628a1d9a0f4bfb8
 /etc/skel/.bash_logout 22bfb8c1dd94b5f3813a2b25da67463f
 /etc/skel/.bashrc ee35a240758f374832e809ae0ea4883a
 /etc/skel/.profile ecb6d3479ac3823f1da7f314d871989b
Description: GNU Bourne Again SHell
 Bash is an sh-compatible command language interpreter that executes
 commands read from the standard input or from a file.  Bash also
 incorporates useful features from the Korn and C shells (ksh and csh).
 .
 Bash is ultimately intended to be a conformant implementation of the
 IEEE POSIX Shell and Tools specification (IEEE Working Group 1003.2).
 .
 The Programmable Completion Code, by Ian Macdonald, is now found in
 the bash-completion package.
Homepage: http://tiswww.case.edu/php/chet/bash/bashtop.html

Package: isc-dhcp-common
Status: install ok installed
Priority: important
Section: net
Installed-Size: 141
Maintainer: Debian ISC DHCP maintainers <pkg-dhcp-devel@lists.alioth.debian.org>
Architecture: amd64
Source: isc-dhcp
Version: 4.3.5-3+deb9u1
Depends: debianutils (>= 2.8.2)
Description: common manpages relevant to all of the isc-dhcp packages
 This package includes manpages that are relevant to the various ISC DHCP
 packages.
 .
 The dhcp-options manpage describes available options for dhcpd and dhclient.
 The dhcp-eval manpage describes evaluation of conditional expressions.
Homepage: http://www.isc.org

Package: libuuid1
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 107
Maintainer: Debian util-linux Maintainers <ah-util-linux@debian.org>
Architecture: amd64
Multi-Arch: same
Source: util-linux
Version: 2.29.2-1+deb9u1
Replaces: e2fsprogs (<< 1.34-1)
Depends: passwd, libc6 (>= 2.4)
Recommends: uuid-runtime
Description: Universally Unique ID library
 The libuuid library generates and parses 128-bit Universally Unique
 IDs (UUIDs). A UUID is an identifier that is unique within the space
 of all such identifiers across both space and time. It can be used for
 multiple purposes, from tagging objects with an extremely short lifetime
 to reliably identifying very persistent objects across a network.
 .
 See RFC 4122 for more information.

Package: libgpm2
Status: install ok installed
Priority: standard
Section: libs
Installed-Size: 60
Maintainer: Peter Samuelson <peter@p12n.org>
Architecture: amd64
Multi-Arch: same
Source: gpm (1.20.4-6.2)
Version: 1.20.4-6.2+b1
Depends: libc6 (>= 2.14)
Suggests: gpm
Description: General Purpose Mouse - shared library
 This package provides a library that handles mouse requests
 and delivers them to applications. See the description for the 'gpm'
 package for more information.
Homepage: http://www.nico.schottelius.org/software/gpm/

Package: libdb5.3
Status: install ok installed
Priority: standard
Section: libs
Installed-Size: 1814
Maintainer: Debian Berkeley DB Group <pkg-db-devel@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: same
Source: db5.3
Version: 5.3.28-12+deb9u1
Depends: libc6 (>= 2.17)
Description: Berkeley v5.3 Database Libraries [runtime]
 This is the runtime package for programs that use the v5.3 Berkeley
 database library.
Homepage: http://www.oracle.com/technetwork/database/database-technologies/berkeleydb/overview/index.html

Package: vim
Status: install ok installed
Priority: optional
Section: editors
Installed-Size: 2374
Maintainer: Debian Vim Maintainers <pkg-vim-maintainers@lists.alioth.debian.org>
Architecture: amd64
Version: 2:8.0.0197-4+deb9u3
Provides: editor
Depends: vim-common (= 2:8.0.0197-4+deb9u3), vim-runtime (= 2:8.0.0197-4+deb9u3), libacl1 (>= 2.2.51-8), libc6 (>= 2.15), libgpm2 (>= 1.20.4), libselinux1 (>= 1.32), libtinfo5 (>= 6)
Suggests: ctags, vim-doc, vim-scripts
Description: Vi IMproved - enhanced vi editor
 Vim is an almost compatible version of the UNIX editor Vi.
 .
 Many new features have been added: multi level undo, syntax
 highlighting, command line history, on-line help, filename
 completion, block operations, folding, Unicode support, etc.
 .
 This package contains a version of vim compiled with a rather
 standard set of features.  This package does not provide a GUI
 version of Vim.  See the other vim-* packages if you need more
 (or less).
Homepage: http://www.vim.org/

Package: libreadline7
Status: install ok installed
Priority: important
Section: libs
Installed-Size: 416
Maintainer: Matthias Klose <doko@debian.org>
Architecture: amd64
Multi-Arch: same
Source: readline
Version: 7.0-3
Depends: readline-common, libc6 (>= 2.15), libtinfo5 (>= 6)
Description: GNU readline and history libraries, run-time libraries
 The GNU readline library aids in the consistency of user interface
 across discrete programs that need to provide a command line
 interface.
 .
 The GNU history library provides a consistent user interface for
 recalling lines of previously typed input.

Package: libeatmydata1
Status: install ok installed
Priority: optional
Section: utils
Installed-Size: 38
Maintainer: Mattia Rizzolo <mattia@debian.org>
Architecture: amd64
Multi-Arch: same
Source: libeatmydata
Version: 105-5
Replaces: eatmydata (<< 82-1)
Depends: libc6 (>= 2.4)
Breaks: eatmydata (<< 82-1)
Description: Library and utilities to disable fsync and friends - shared library
 This package contains the actual LD_PRELOAD library (libeatmydata) supporting
 the operation of the eatmydata package. Users typically want to use or depend
 on the eatmydata package instead of this one, so see its description for
 further information.
Homepage: https://launchpad.net/libeatmydata

Package: libcap2-bin
Status: install ok installed
Priority: important
Section: utils
Installed-Size: 85
Maintainer: Christian Kastner <ckk@debian.org>
Architecture: amd64
Multi-Arch: foreign
Source: libcap2
Version: 1:2.25-1
Replaces: libcap-bin
Depends: libc6 (>= 2.14), libcap2 (>= 1:2.10)
Recommends: libpam-cap
Breaks: libcap-bin
Description: POSIX 1003.1e capabilities (utilities)
 Libcap implements the user-space interfaces to the POSIX 1003.1e capabilities
 available in Linux kernels. These capabilities are a partitioning of the all
 powerful root privilege into a set of distinct privileges.
 .
 This package contains additional utilities.
Homepage: http://sites.google.com/site/fullycapable/

Package: debconf
Status: install ok installed
Priority: required
Section: admin
Installed-Size: 558
Maintainer: Debconf Developers <debconf-devel@lists.alioth.debian.org>
Architecture: all
Multi-Arch: foreign
Version: 1.5.61
Replaces: debconf-tiny
Provides: debconf-2.0
Pre-Depends: perl-base (>= 5.20.1-3~)
Recommends: apt-utils (>= 0.5.1), debconf-i18n
Suggests: debconf-doc, debconf-utils, whiptail | dialog, libterm-readline-gnu-perl, libgtk2-perl (>= 1:1.130), libnet-ldap-perl, perl, libqtgui4-perl, libqtcore4-perl
Conflicts: apt (<< 0.3.12.1), cdebconf (<< 0.96), debconf-tiny, debconf-utils (<< 1.3.22), dialog (<< 0.9b-20020814-1), menu (<= 2.1.3-1), whiptail (<< 0.51.4-11), whiptail-utf8 (<= 0.50.17-13)
Conffiles:
 /etc/apt/apt.conf.d/70debconf 7e9d09d5801a42b4926b736b8eeabb73
 /etc/debconf.conf 8c0619be413824f1fc7698cee0f23811
Description: Debian configuration management system
 Debconf is a configuration management system for debian packages. Packages
 use Debconf to ask questions when they are installed.

Package: zlib1g
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 156
Maintainer: Mark Brown <broonie@debian.org>
Architecture: amd64
Multi-Arch: same
Source: zlib
Version: 1:1.2.8.dfsg-5
Provides: libz1
Depends: libc6 (>= 2.14)
Breaks: libxml2 (<< 2.7.6.dfsg-2), texlive-binaries (<< 2009-12)
Conflicts: zlib1 (<= 1:1.0.4-7)
Description: compression library - runtime
 zlib is a library implementing the deflate compression method found
 in gzip and PKZIP.  This package includes the shared library.
Homepage: http://zlib.net/

Package: hostname
Essential: yes
Status: install ok installed
Priority: required
Section: admin
Installed-Size: 47
Maintainer: Debian Hostname Team <hostname-devel@lists.alioth.debian.org>
Architecture: amd64
Source: hostname (3.18)
Version: 3.18+b1
Replaces: nis (<< 3.17-30)
Pre-Depends: libc6 (>= 2.4)
Breaks: nis (<< 3.17-30)
Description: utility to set/show the host name or domain name
 This package provides commands which can be used to display the system's
 DNS name, and to display or set its hostname or NIS domain name.

Package: multiarch-support
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 221
Maintainer: GNU Libc Maintainers <debian-glibc@lists.debian.org>
Architecture: amd64
Multi-Arch: foreign
Source: glibc
Version: 2.24-11+deb9u4
Depends: libc6 (>= 2.3.6-2)
Description: Transitional package to ensure multiarch compatibility
 This is a transitional package used to ensure multiarch support is present
 in ld.so before unpacking libraries to the multiarch directories.  It can
 be removed once nothing on the system depends on it.
Homepage: http://www.gnu.org/software/libc/libc.html

Package: tzdata
Status: install ok installed
Priority: required
Section: localization
Installed-Size: 3036
Maintainer: GNU Libc Maintainers <debian-glibc@lists.debian.org>
Architecture: all
Multi-Arch: foreign
Version: 2021a-0+deb9u1
Replaces: libc0.1, libc0.3, libc6, libc6.1
Provides: tzdata-stretch
Depends: debconf (>= 0.5) | debconf-2.0
Description: time zone and daylight-saving time data
 This package contains data required for the implementation of
 standard local time for many representative locations around the
 globe. It is updated periodically to reflect changes made by
 political bodies to time zone boundaries, UTC offsets, and
 daylight-saving rules.
Homepage: http://www.iana.org/time-zones

Package: init
Status: install ok installed
Priority: important
Section: metapackages
Installed-Size: 19
Maintainer: Debian systemd Maintainers <pkg-systemd-maintainers@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: foreign
Source: init-system-helpers
Version: 1.48
Depends: init-system-helpers (>= 1.25)
Pre-Depends: systemd-sysv | sysvinit-core
Description: metapackage ensuring an init system is installed
 This package is a metapackage which allows you to select from the available
 init systems while ensuring that one of these is available on the system at
 all times.
Important: yes

Package: systemd-sysv
Status: install ok installed
Priority: important
Section: admin
Installed-Size: 107
Maintainer: Debian systemd Maintainers <pkg-systemd-maintainers@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: foreign
Source: systemd
Version: 232-25+deb9u12
Replaces: sysvinit (<< 2.88dsf-44~), sysvinit-core, upstart (<< 1.13.2-0ubuntu10~), upstart-sysv
Pre-Depends: systemd
Conflicts: file-rc, openrc (<< 0.20.4-2.1), sysvinit-core, upstart (<< 1.13.2-0ubuntu10~), upstart-sysv
Description: system and service manager - SysV links
 systemd is a system and service manager for Linux. It provides aggressive
 parallelization capabilities, uses socket and D-Bus activation for starting
 services, offers on-demand starting of daemons, keeps track of processes using
 Linux control groups, maintains mount and automount points and implements an
 elaborate transactional dependency-based service control logic.
 .
 systemd is compatible with SysV and LSB init scripts and can work as a
 drop-in replacement for sysvinit.
 .
 This package provides the manual pages and links needed for systemd
 to replace sysvinit. Installing systemd-sysv will overwrite /sbin/init with a
 link to systemd.
Homepage: https://www.freedesktop.org/wiki/Software/systemd

Package: mawk
Status: install ok installed
Priority: required
Section: interpreters
Installed-Size: 183
Maintainer: Steve Langasek <vorlon@debian.org>
Architecture: amd64
Multi-Arch: foreign
Source: mawk (1.3.3-17)
Version: 1.3.3-17+b3
Provides: awk
Pre-Depends: libc6 (>= 2.14)
Description: a pattern scanning and text processing language
 Mawk is an interpreter for the AWK Programming Language. The AWK
 language is useful for manipulation of data files, text retrieval and
 processing, and for prototyping and experimenting with algorithms. Mawk
 is a new awk meaning it implements the AWK language as defined in Aho,
 Kernighan and Weinberger, The AWK Programming Language, Addison-Wesley
 Publishing, 1988. (Hereafter referred to as the AWK book.) Mawk conforms
 to the POSIX 1003.2 (draft 11.3) definition of the AWK language
 which contains a few features not described in the AWK book, and mawk
 provides a small number of extensions.
 .
 Mawk is smaller and much faster than gawk. It has some compile-time
 limits such as NF = 32767 and sprintf buffer = 1020.

Package: gzip
Essential: yes
Status: install ok installed
Priority: required
Section: utils
Installed-Size: 231
Maintainer: Bdale Garbee <bdale@gag.com>
Architecture: amd64
Source: gzip (1.6-5)
Version: 1.6-5+b1
Depends: dpkg (>= 1.15.4) | install-info
Pre-Depends: libc6 (>= 2.17)
Suggests: less
Description: GNU compression utilities
 This package provides the standard GNU file compression utilities, which
 are also the default compression tools for Debian.  They typically operate
 on files with names ending in '.gz', but can also decompress files ending
 in '.Z' created with 'compress'.

Package: libelf1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 934
Maintainer: Kurt Roeckx <kurt@roeckx.be>
Architecture: amd64
Multi-Arch: same
Source: elfutils
Version: 0.168-1
Depends: libc6 (>= 2.14), zlib1g (>= 1:1.1.4)
Description: library to read and write ELF files
 The libelf1 package provides a shared library which allows reading and
 writing ELF files on a high level.  Third party programs depend on
 this package to read internals of ELF files.  The programs of the
 elfutils package use it also to generate new ELF files.
 .
 This library is part of elfutils.
Homepage: https://sourceware.org/elfutils/

Package: groff-base
Status: install ok installed
Priority: important
Section: text
Installed-Size: 3261
Maintainer: Colin Watson <cjwatson@debian.org>
Architecture: amd64
Multi-Arch: foreign
Source: groff
Version: 1.22.3-9
Replaces: groff (<< 1.20.1-6), jgroff (<< 1.17-1)
Depends: libc6 (>= 2.14), libgcc1 (>= 1:4.0), libstdc++6 (>= 4.1.1)
Suggests: groff
Breaks: groff (<< 1.17-1), jgroff (<< 1.17-1), pmake (<< 1.45-7), troffcvt (<< 1.04-14)
Conffiles:
 /etc/groff/man.local e6591616404c7c443f71ff21d27430d7
 /etc/groff/mdoc.local 4bc6267468942826b757fa2f868c8237
Description: GNU troff text-formatting system (base system components)
 This package contains the traditional UN*X text formatting tools
 troff, nroff, tbl, eqn, and pic. These utilities, together with the
 man-db package, are essential for displaying the on-line manual pages.
 .
 groff-base is a stripped-down package containing the necessary components
 to read manual pages in ASCII, Latin-1, and UTF-8, plus the PostScript
 device (groff's default). Users who want a full groff installation, with
 the standard set of devices, fonts, macros, and documentation, should
 install the groff package.
Homepage: https://www.gnu.org/software/groff/

Package: gpgv
Status: install ok installed
Priority: important
Section: utils
Installed-Size: 721
Maintainer: Debian GnuPG Maintainers <pkg-gnupg-maint@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: foreign
Source: gnupg2
Version: 2.1.18-8~deb9u4
Replaces: gnupg2 (<< 2.0.21-2), gpgv2 (<< 2.1.11-7+exp1)
Depends: libbz2-1.0, libc6 (>= 2.14), libgcrypt20 (>= 1.7.0), libgpg-error0 (>= 1.14), zlib1g (>= 1:1.1.4)
Suggests: gnupg
Breaks: gnupg2 (<< 2.0.21-2), gpgv2 (<< 2.1.11-7+exp1), python-debian (<< 0.1.29)
Description: GNU privacy guard - signature verification tool
 GnuPG is GNU's tool for secure communication and data storage.
 .
 gpgv is actually a stripped-down version of gpg which is only able
 to check signatures. It is somewhat smaller than the fully-blown gpg
 and uses a different (and simpler) way to check that the public keys
 used to make the signature are valid. There are no configuration
 files and only a few options are implemented.
Homepage: https://www.gnupg.org/

Package: libpython3.5-stdlib
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 9901
Maintainer: Matthias Klose <doko@debian.org>
Architecture: amd64
Multi-Arch: same
Source: python3.5
Version: 3.5.3-1+deb9u3
Depends: libpython3.5-minimal (= 3.5.3-1+deb9u3), mime-support, libbz2-1.0, libc6 (>= 2.15), libdb5.3, liblzma5 (>= 5.1.1alpha+20120614), libmpdec2, libncursesw5 (>= 6), libreadline7 (>= 7.0~beta), libsqlite3-0 (>= 3.5.9), libtinfo5 (>= 6)
Breaks: libmpdec2 (<< 2.4.2)
Description: Interactive high-level object-oriented language (standard library, version 3.5)
 Python is a high-level, interactive, object-oriented language. Its 3.5 version
 includes an extensive class library with lots of goodies for
 network programming, system administration, sounds and graphics.
 .
 This package contains Python 3.5's standard library. It is normally not
 used on its own, but as a dependency of python3.5.

Package: libcap2
Status: install ok installed
Priority: important
Section: libs
Installed-Size: 47
Maintainer: Christian Kastner <ckk@debian.org>
Architecture: amd64
Multi-Arch: same
Version: 1:2.25-1
Depends: libc6 (>= 2.14)
Description: POSIX 1003.1e capabilities (library)
 Libcap implements the user-space interfaces to the POSIX 1003.1e capabilities
 available in Linux kernels. These capabilities are a partitioning of the all
 powerful root privilege into a set of distinct privileges.
 .
 This package contains the shared library.
Homepage: http://sites.google.com/site/fullycapable/

Package: python3-idna
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 271
Maintainer: Debian Python Modules Team <python-modules-team@lists.alioth.debian.org>
Architecture: all
Source: python-idna
Version: 2.2-1
Depends: python3:any (>= 3.3.2-2~)
Description: Python IDNA2008 (RFC 5891) handling (Python 3)
 A library to support the Internationalised Domain Names in Applications (IDNA)
 protocol as specified in RFC 5891. This version of the protocol is often
 referred to as “IDNA2008” and can produce different results from the earlier
 standard from 2003.
 .
 The library is also intended to act as a suitable drop-in replacement for the
 “encodings.idna” module that comes with the Python standard library but
 currently only supports the older 2003 specification.
 .
 This package contains the module for Python 3.
Homepage: https://github.com/kjd/idna

Package: bsdutils
Essential: yes
Status: install ok installed
Priority: required
Section: utils
Installed-Size: 238
Maintainer: Debian util-linux Maintainers <ah-util-linux@debian.org>
Architecture: amd64
Multi-Arch: foreign
Source: util-linux (2.29.2-1+deb9u1)
Version: 1:2.29.2-1+deb9u1
Replaces: bash-completion (<< 1:2.1-4.1~)
Pre-Depends: libc6 (>= 2.16), libsystemd0
Recommends: bsdmainutils
Breaks: bash-completion (<< 1:2.1-4.1~)
Description: basic utilities from 4.4BSD-Lite
 This package contains the bare minimum of BSD utilities needed for a
 Debian system: logger, renice, script, scriptreplay, and wall. The
 remaining standard BSD utilities are provided by bsdmainutils.

Package: python3-json-pointer
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 43
Maintainer: PKG OpenStack <openstack-devel@lists.alioth.debian.org>
Architecture: all
Source: python-json-pointer
Version: 1.10-1
Depends: python3:any (>= 3.3.2-2~)
Description: resolve JSON pointers - Python 3.x
 Python-json-pointer is a small library to resolve JSON pointers according to
 the IETF draft specification. JSON Pointer defines a string syntax for
 identifying a specific value within a JavaScript Object Notation (JSON)
 document.
 .
 This package provides the module for Python 3.x.
Homepage: https://github.com/stefankoegl/python-json-pointer

Package: dash
Essential: yes
Status: install ok installed
Priority: required
Section: shells
Installed-Size: 204
Maintainer: Gerrit Pape <pape@smarden.org>
Architecture: amd64
Version: 0.5.8-2.4
Depends: debianutils (>= 2.15), dpkg (>= 1.15.0)
Pre-Depends: libc6 (>= 2.14)
Description: POSIX-compliant shell
 The Debian Almquist Shell (dash) is a POSIX-compliant shell derived
 from ash.
 .
 Since it executes scripts faster than bash, and has fewer library
 dependencies (making it more robust against software or hardware
 failures), it is used as the default system shell on Debian systems.
Homepage: http://gondor.apana.org.au/~herbert/dash/

Package: gcc-6-base
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 209
Maintainer: Debian GCC Maintainers <debian-gcc@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: gcc-6
Version: 6.3.0-18+deb9u1
Breaks: gcc-4.4-base (<< 4.4.7), gcc-4.7-base (<< 4.7.3), gcj-4.4-base (<< 4.4.6-9~), gcj-4.6-base (<< 4.6.1-4~), gnat-4.4-base (<< 4.4.6-3~), gnat-4.6 (<< 4.6.1-5~)
Description: GCC, the GNU Compiler Collection (base package)
 This package contains files common to all languages and libraries
 contained in the GNU Compiler Collection (GCC).
Homepage: http://gcc.gnu.org/

Package: python3-six
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 56
Maintainer: Colin Watson <cjwatson@debian.org>
Architecture: all
Multi-Arch: foreign
Source: six
Version: 1.10.0-3
Depends: python3:any (>= 3.4~)
Description: Python 2 and 3 compatibility library (Python 3 interface)
 Six is a Python 2 and 3 compatibility library. It provides utility
 functions for smoothing over the differences between the Python versions
 with the goal of writing Python code that is compatible on both Python
 versions.
 .
 This package provides Six on the Python 3 module path. It is complemented
 by python-six and pypy-six.
Homepage: https://pythonhosted.org/six/

Package: mount
Essential: yes
Status: install ok installed
Priority: required
Section: admin
Installed-Size: 444
Maintainer: Debian util-linux Maintainers <ah-util-linux@debian.org>
Architecture: amd64
Multi-Arch: foreign
Source: util-linux
Version: 2.29.2-1+deb9u1
Replaces: bash-completion (<< 1:2.1-4.3~)
Pre-Depends: libblkid1 (>= 2.17.2), libc6 (>= 2.17), libmount1 (>= 2.25), libselinux1 (>= 2.6-3~), libsmartcols1 (>= 2.28~rc1), libudev1 (>= 183)
Suggests: nfs-common (>= 1:1.1.0-13)
Breaks: bash-completion (<< 1:2.1-4.3~)
Description: tools for mounting and manipulating filesystems
 This package provides the mount(8), umount(8), swapon(8),
 swapoff(8), and losetup(8) commands.

Package: libx11-6
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 1548
Maintainer: Debian X Strike Force <debian-x@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: libx11
Version: 2:1.6.4-3+deb9u3
Depends: libc6 (>= 2.15), libxcb1 (>= 1.11.1), libx11-data
Description: X11 client-side library
 This package provides a client interface to the X Window System, otherwise
 known as 'Xlib'.  It provides a complete API for the basic functions of the
 window system.
 .
 More information about X.Org can be found at:
 <URL:https://www.X.org>
 .
 This module can be found at
 git://anongit.freedesktop.org/git/xorg/lib/libX11

Package: libsystemd0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 654
Maintainer: Debian systemd Maintainers <pkg-systemd-maintainers@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: same
Source: systemd
Version: 232-25+deb9u12
Pre-Depends: libc6 (>= 2.17), libgcrypt20 (>= 1.7.0), liblz4-1 (>= 0.0~r113), liblzma5 (>= 5.1.1alpha+20120614), libselinux1 (>= 2.1.9)
Description: systemd utility library
 The libsystemd0 library provides interfaces to various systemd components.
Homepage: https://www.freedesktop.org/wiki/Software/systemd

Package: libdns-export162
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 2119
Maintainer: Debian DNS Packaging <pkg-dns-devel@lists.alioth.debian.org>
Architecture: amd64
Source: bind9
Version: 1:9.10.3.dfsg.P4-12.3+deb9u8
Depends: libc6 (>= 2.14), libisc-export160, libssl1.0.2 (>= 1.0.2d)
Description: Exported DNS Shared Library
 The Berkeley Internet Name Domain (BIND) implements an Internet domain
 name server.  BIND is the most widely-used name server software on the
 Internet, and is supported by the Internet Software Consortium, www.isc.org.
 .
 This package delivers the exported libdns shared library.

Package: libc6
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 10686
Maintainer: GNU Libc Maintainers <debian-glibc@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: glibc
Version: 2.24-11+deb9u4
Replaces: libc6-amd64
Depends: libgcc1
Suggests: glibc-doc, debconf | debconf-2.0, libc-l10n, locales
Breaks: hurd (<< 1:0.5.git20140203-1), libtirpc1 (<< 0.2.3), locales (<< 2.24), locales-all (<< 2.24), lsb-core (<= 3.2-27), nscd (<< 2.24)
Conffiles:
 /etc/ld.so.conf.d/x86_64-linux-gnu.conf 593ad12389ab2b6f952e7ede67b8fbbf
Description: GNU C Library: Shared libraries
 Contains the standard libraries that are used by nearly all programs on
 the system. This package includes shared versions of the standard C library
 and the standard math library, as well as many others.
Homepage: http://www.gnu.org/software/libc/libc.html

Package: distro-info-data
Status: install ok installed
Priority: optional
Section: devel
Installed-Size: 15
Maintainer: Benjamin Drung <bdrung@debian.org>
Architecture: all
Multi-Arch: foreign
Version: 0.36
Replaces: distro-info (<< 0.3~)
Breaks: distro-info (<< 0.3~)
Description: information about the distributions' releases (data files)
 Information about all releases of Debian and Ubuntu. The distro-info script
 will give you the codename for e.g. the latest stable release of your
 distribution. To get information about a specific distribution there are the
 debian-distro-info and the ubuntu-distro-info scripts.
 .
 This package contains the data files.

Package: libfdisk1
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 469
Maintainer: Debian util-linux Maintainers <ah-util-linux@debian.org>
Architecture: amd64
Multi-Arch: same
Source: util-linux
Version: 2.29.2-1+deb9u1
Depends: libblkid1 (>= 2.24.2), libc6 (>= 2.17), libuuid1 (>= 2.16)
Description: fdisk partitioning library
 The libfdisk library is used for manipulating partition tables. It is
 the core of the fdisk, cfdisk, and sfdisk tools.

Package: libpcre3
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 668
Maintainer: Matthew Vernon <matthew@debian.org>
Architecture: amd64
Multi-Arch: same
Source: pcre3
Version: 2:8.39-3
Depends: libc6 (>= 2.14)
Pre-Depends: multiarch-support
Breaks: approx (<< 4.4-1~), cduce (<< 0.5.3-2~), cmigrep (<< 1.5-7~), galax (<< 1.1-7~), libpcre-ocaml (<< 6.0.1~), liquidsoap (<< 0.9.2-3~), ocsigen (<< 1.3.3-1~)
Conflicts: libpcre3-dev (<= 4.3-3)
Description: Old Perl 5 Compatible Regular Expression Library - runtime files
 This is a library of functions to support regular expressions whose syntax
 and semantics are as close as possible to those of the Perl 5 language.
 .
 New packages should use the newer pcre2 packages, and existing
 packages should migrate to pcre2.
 .
 This package contains the runtime libraries.

Package: libdevmapper1.02.1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 401
Maintainer: Debian LVM Team <pkg-lvm-maintainers@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: same
Source: lvm2 (2.02.168-2)
Version: 2:1.02.137-2
Depends: libc6 (>= 2.22), libselinux1 (>= 1.32), libudev1 (>= 183), dmsetup (>= 2:1.02.137-2)
Breaks: liblvm2app2.2 (<< 2.02.122), lvm2 (<< 2.02.122)
Conflicts: libdevmapper1.02
Description: Linux Kernel Device Mapper userspace library
 The Linux Kernel Device Mapper is the LVM (Linux Logical Volume Management)
 Team's implementation of a minimalistic kernel-space driver that handles
 volume management, while keeping knowledge of the underlying device layout
 in user-space.  This makes it useful for not only LVM, but software raid,
 and other drivers that create "virtual" block devices.
 .
 This package contains the (user-space) shared library for accessing the
 device-mapper; it allows usage of the device-mapper through a clean,
 consistent interface (as opposed to through kernel ioctls).
Homepage: http://sources.redhat.com/lvm2/

Package: python3-pkg-resources
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 511
Maintainer: Matthias Klose <doko@debian.org>
Architecture: all
Multi-Arch: foreign
Source: python-setuptools
Version: 33.1.1-1
Depends: python3:any (>= 3.3.2-2~)
Suggests: python3-setuptools
Description: Package Discovery and Resource Access using pkg_resources
 The pkg_resources module provides an API for Python libraries to
 access their resource files, and for extensible applications and
 frameworks to automatically discover plugins.  It also provides
 runtime support for using C extensions that are inside zipfile-format
 eggs, support for merging packages that have separately-distributed
 modules or subpackages, and APIs for managing Python's current
 "working set" of active packages.
Homepage: https://pypi.python.org/pypi/setuptools

Package: lsb-release
Status: install ok installed
Priority: optional
Section: misc
Installed-Size: 62
Maintainer: Debian LSB Team <debian-lsb@lists.debian.org>
Architecture: all
Multi-Arch: foreign
Source: lsb
Version: 9.20161125
Depends: python3:any (>= 3.4~), distro-info-data
Recommends: apt
Suggests: lsb
Description: Linux Standard Base version reporting utility
 The Linux Standard Base (http://www.linuxbase.org/) is a standard
 core system that third-party applications written for Linux can
 depend upon.
 .
 The lsb-release command is a simple tool to help identify the Linux
 distribution being used and its compliance with the Linux Standard Base.
 LSB conformance will not be reported unless the required metapackages are
 installed.
 .
 While it is intended for use by LSB packages, this command may also
 be useful for programmatically distinguishing between a pure Debian
 installation and derived distributions.
Homepage: http://www.linuxfoundation.org/collaborate/workgroups/lsb

Package: coreutils
Essential: yes
Status: install ok installed
Priority: required
Section: utils
Installed-Size: 15103
Maintainer: Michael Stone <mstone@debian.org>
Architecture: amd64
Multi-Arch: foreign
Version: 8.26-3
Replaces: mktemp, realpath, timeout
Pre-Depends: libacl1 (>= 2.2.51-8), libattr1 (>= 1:2.4.46-8), libc6 (>= 2.17), libselinux1 (>= 2.1.13)
Conflicts: timeout
Description: GNU core utilities
 This package contains the basic file, shell and text manipulation
 utilities which are expected to exist on every operating system.
 .
 Specifically, this package includes:
 arch base64 basename cat chcon chgrp chmod chown chroot cksum comm cp
 csplit cut date dd df dir dircolors dirname du echo env expand expr
 factor false flock fmt fold groups head hostid id install join link ln
 logname ls md5sum mkdir mkfifo mknod mktemp mv nice nl nohup nproc numfmt
 od paste pathchk pinky pr printenv printf ptx pwd readlink realpath rm
 rmdir runcon sha*sum seq shred sleep sort split stat stty sum sync tac
 tail tee test timeout touch tr true truncate tsort tty uname unexpand
 uniq unlink users vdir wc who whoami yes
Homepage: http://gnu.org/software/coreutils

Package: file
Status: install ok installed
Priority: standard
Section: utils
Installed-Size: 96
Maintainer: Christoph Biedl <debian.axhn@manchmal.in-ulm.de>
Architecture: amd64
Multi-Arch: foreign
Version: 1:5.30-1+deb9u3
Depends: libc6 (>= 2.4), libmagic1 (= 1:5.30-1+deb9u3), zlib1g (>= 1:1.1.4)
Description: Recognize the type of data in a file using "magic" numbers
 The file command is "a file type guesser", a command-line tool that
 tells you in words what kind of data a file contains.
 .
 This package contains the file program itself.
Homepage: http://www.darwinsys.com/file/

Package: iproute2
Status: install ok installed
Priority: important
Section: net
Installed-Size: 1757
Maintainer: Debian iproute2 Maintainers <ah-iproute@debian.org>
Architecture: amd64
Multi-Arch: foreign
Version: 4.9.0-1+deb9u1
Replaces: iproute
Provides: arpd
Depends: libc6 (>= 2.14), libdb5.3, libelf1 (>= 0.131), libmnl0 (>= 1.0.3-4~), libselinux1 (>= 2.0.15)
Recommends: libatm1 (>= 2.4.1-17~), libxtables12 (>= 1.6.0+snapshot20161117)
Suggests: iproute2-doc
Conflicts: arpd, iproute (<< 20130000-1)
Conffiles:
 /etc/iproute2/bpf_pinning fd070252e6e9996bd04d9d59e4ce21eb
 /etc/iproute2/ematch_map b91e7f9b26918449bade9573f8871d61
 /etc/iproute2/group 3aea2c0e0dd75e13a5f8f48f2936915f
 /etc/iproute2/nl_protos c0fc5315e2dd3c6b50f19da3678bce80
 /etc/iproute2/rt_dsfield 4c80d267a84d350d89d88774efe48a0f
 /etc/iproute2/rt_protos a4f97323f29caf9faf49596aea11d91a
 /etc/iproute2/rt_realms 7137bdf40e8d58c87ac7e3bba503767f
 /etc/iproute2/rt_scopes 6298b8df09e9bda23ea7da49021ca457
 /etc/iproute2/rt_tables a1313318d6778fe6b8c680248ef5a463
 /etc/iproute2/rt_tables.d/README 16d42be21c00b9edfae1fd4c39c15afc
Description: networking and traffic control tools
 The iproute2 suite is a collection of utilities for networking and
 traffic control.
 .
 These tools communicate with the Linux kernel via the (rt)netlink
 interface, providing advanced features not available through the
 legacy net-tools commands 'ifconfig' and 'route'.
Homepage: https://wiki.linuxfoundation.org/networking/iproute2

Package: tcpd
Status: install ok installed
Priority: optional
Section: net
Installed-Size: 92
Maintainer: Marco d'Itri <md@linux.it>
Architecture: amd64
Multi-Arch: foreign
Source: tcp-wrappers
Version: 7.6.q-26
Depends: libc6 (>= 2.14), libwrap0 (= 7.6.q-26)
Description: Wietse Venema's TCP wrapper utilities
 Wietse Venema's network logger, also known as TCPD or LOG_TCP.
 .
 These programs log the client host name of incoming telnet,
 ftp, rsh, rlogin, finger etc. requests.
 .
 Security options are:
  - access control per host, domain and/or service;
  - detection of host name spoofing or host address spoofing;
  - booby traps to implement an early-warning system.

Package: libbsd0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 159
Maintainer: Guillem Jover <guillem@debian.org>
Architecture: amd64
Multi-Arch: same
Source: libbsd
Version: 0.8.3-1+deb9u1
Depends: libc6 (>= 2.16)
Description: utility functions from BSD systems - shared library
 This library provides some C functions such as strlcpy() that are commonly
 available on BSD systems but not on others like GNU systems.
 .
 For a detailed list of the provided functions, please see the libbsd-dev
 package description.
Homepage: https://libbsd.freedesktop.org/

Package: e2fsprogs
Essential: yes
Status: install ok installed
Priority: required
Section: admin
Installed-Size: 4027
Maintainer: Theodore Y. Ts'o <tytso@mit.edu>
Architecture: amd64
Multi-Arch: foreign
Version: 1.43.4-2+deb9u2
Replaces: hurd (<= 20040301-1), libblkid1 (<< 1.38+1.39-WIP-2005.12.10-2), libuuid1 (<< 1.38+1.39-WIP-2005.12.10-2)
Pre-Depends: e2fslibs (= 1.43.4-2+deb9u2), libblkid1 (>= 2.17.2), libc6 (>= 2.14), libcomerr2 (>= 1.42~WIP-2011-10-05-1), libss2 (>= 1.34-1), libuuid1 (>= 2.16), util-linux (>= 2.15~rc1-1)
Suggests: gpart, parted, fuse2fs, e2fsck-static
Conflicts: dump (<< 0.4b4-4), initscripts (<< 2.85-4), quota (<< 1.55-8.1), sysvinit (<< 2.85-4)
Conffiles:
 /etc/mke2fs.conf 22503ecadd27f788ab3e612aded4f5b0
Description: ext2/ext3/ext4 file system utilities
 The ext2, ext3 and ext4 file systems are successors of the original ext
 ("extended") file system. They are the main file system types used for
 hard disks on Debian and other Linux systems.
 .
 This package contains programs for creating, checking, and maintaining
 ext2/3/4-based file systems.  It also includes the "badblocks" program,
 which can be used to scan for bad blocks on a disk or other storage device.
Homepage: http://e2fsprogs.sourceforge.net

Package: tar
Essential: yes
Status: install ok installed
Priority: required
Section: utils
Installed-Size: 2770
Maintainer: Bdale Garbee <bdale@gag.com>
Architecture: amd64
Multi-Arch: foreign
Version: 1.29b-1.1
Replaces: cpio (<< 2.4.2-39)
Pre-Depends: libacl1 (>= 2.2.51-8), libc6 (>= 2.17), libselinux1 (>= 1.32)
Suggests: bzip2, ncompress, xz-utils, tar-scripts
Breaks: dpkg-dev (<< 1.14.26)
Conflicts: cpio (<= 2.4.2-38)
Conffiles:
 /etc/rmt 3c58b7cd13da1085eff0acc6a00f43c7
Description: GNU version of the tar archiving utility
 Tar is a program for packaging a set of files as a single archive in tar
 format.  The function it performs is conceptually similar to cpio, and to
 things like PKZIP in the DOS world.  It is heavily used by the Debian package
 management system, and is useful for performing system backups and exchanging
 sets of files with others.

Package: libkrb5support0
Status: install ok installed
Priority: standard
Section: libs
Installed-Size: 159
Maintainer: Sam Hartman <hartmans@debian.org>
Architecture: amd64
Multi-Arch: same
Source: krb5
Version: 1.15-1+deb9u2
Depends: libc6 (>= 2.14), libkeyutils1 (>= 1.4)
Breaks: libgssapi-krb5-2 (<< 1.13~alpha1-1), libk5crypto3 (<< 1.13~alpha1-1), libkadm5clnt-mit9 (<< 1.13~alpha1-1), libkadm5srv-mit9 (<< 1.13~alpha1-1), libkdb5-7 (<< 1.13~alpha1-1)
Description: MIT Kerberos runtime libraries - Support library
 Kerberos is a system for authenticating users and services on a network.
 Kerberos is a trusted third-party service.  That means that there is a
 third party (the Kerberos server) that is trusted by all the entities on
 the network (users and services, usually called "principals").
 .
 This is the MIT reference implementation of Kerberos V5.
 .
 This package contains an internal runtime support library used by other
 Kerberos libraries.
Homepage: http://web.mit.edu/kerberos/

Package: libprocps6
Status: install ok installed
Priority: important
Section: libs
Installed-Size: 121
Maintainer: Craig Small <csmall@debian.org>
Architecture: amd64
Multi-Arch: same
Source: procps
Version: 2:3.3.12-3+deb9u1
Replaces: procps (<< 1:3.3.2-1)
Depends: libc6 (>= 2.14), libsystemd0 (>= 209)
Description: library for accessing process information from /proc
 The libprocps library is a way of accessing information out of the /proc
 filesystem.
 .
 This package contains the shared libraries necessary to run programs
 compiled with libprocps.
Homepage: https://gitlab.com/procps-ng/procps

Package: libbz2-1.0
Status: install ok installed
Priority: important
Section: libs
Installed-Size: 96
Maintainer: Anibal Monsalve Salazar <anibal@debian.org>
Architecture: amd64
Multi-Arch: same
Source: bzip2
Version: 1.0.6-8.1
Depends: libc6 (>= 2.4)
Description: high-quality block-sorting file compressor library - runtime
 This package contains libbzip2 which is used by the bzip2 compressor.
 .
 bzip2 is a freely available, patent free, high-quality data compressor.
 It typically compresses files to within 10% to 15% of the best available
 techniques, whilst being around twice as fast at compression and six
 times faster at decompression.
 .
 bzip2 compresses files using the Burrows-Wheeler block-sorting text
 compression algorithm, and Huffman coding. Compression is generally
 considerably better than that achieved by more conventional
 LZ77/LZ78-based compressors, and approaches the performance of the PPM
 family of statistical compressors.
 .
 The archive file format of bzip2 (.bz2) is incompatible with that of its
 predecessor, bzip (.bz).
Homepage: http://www.bzip.org/

Package: ucf
Status: install ok installed
Priority: standard
Section: utils
Installed-Size: 191
Maintainer: Manoj Srivastava <srivasta@debian.org>
Architecture: all
Multi-Arch: foreign
Version: 3.0036
Depends: debconf (>= 1.5.19), coreutils (>= 5.91)
Conffiles:
 /etc/ucf.conf 5565b8b26108c49ba575ba452cd69b3e
Description: Update Configuration File(s): preserve user changes to config files
 Debian policy mandates that user changes to configuration files must be
 preserved during package upgrades. The easy way to achieve this behavior
 is to make the configuration file a 'conffile', in which case dpkg
 handles the file specially during upgrades, prompting the user as
 needed.
 .
 This is appropriate only if it is possible to distribute a default
 version that will work for most installations, although some system
 administrators may choose to modify it. This implies that the
 default version will be part of the package distribution, and must
 not be modified by the maintainer scripts during installation (or at
 any other time).
 .
 This script attempts to provide conffile-like handling for files that
 may not be labelled conffiles, and are not shipped in a Debian package,
 but handled by the postinst instead. This script allows one to
 maintain files in /etc, preserving user changes and in general
 offering the same facilities while upgrading that dpkg normally
 provides for 'conffiles'.
 .
 Additionally, this script provides facilities for transitioning a
 file that had not been provided with conffile-like protection to come
 under this schema, and attempts to minimize questions asked at
 installation time. Indeed, the transitioning facility is better than the
 one offered by dpkg while transitioning a file from a non-conffile to
 conffile status.

Package: libkmod2
Status: install ok installed
Priority: important
Section: libs
Installed-Size: 116
Maintainer: Marco d'Itri <md@linux.it>
Architecture: amd64
Multi-Arch: same
Source: kmod
Version: 23-2
Depends: libc6 (>= 2.17)
Description: libkmod shared library
 This library provides an API for insertion, removal, configuration and
 listing of kernel modules.

Package: libxmuu1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 50
Maintainer: Debian X Strike Force <debian-x@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: libxmu
Version: 2:1.1.2-2
Depends: libc6 (>= 2.4), libx11-6
Description: X11 miscellaneous micro-utility library
 libXmuu provides a set of miscellaneous utility convenience functions for X
 libraries to use.  It is a lighter version of libXmu that does not depend
 on libXt or libXext; for more information on libXmu, see libxmu6.
 .
 More information about X.Org can be found at:
 <URL:http://www.X.org>
 .
 This module can be found at
 git://anongit.freedesktop.org/git/xorg/lib/libXmu

Package: libblkid1
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 367
Maintainer: Debian util-linux Maintainers <ah-util-linux@debian.org>
Architecture: amd64
Multi-Arch: same
Source: util-linux
Version: 2.29.2-1+deb9u1
Depends: libc6 (>= 2.17), libuuid1 (>= 2.16)
Description: block device ID library
 The blkid library allows system programs such as fsck and mount to
 quickly and easily find block devices by filesystem UUID or label.
 This allows system administrators to avoid specifying filesystems by
 hard-coded device names and use a logical naming system instead.

Package: python3-markupsafe
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 61
Maintainer: Piotr Ożarowski <piotr@debian.org>
Architecture: amd64
Source: markupsafe
Version: 0.23-3
Depends: python3 (<< 3.6), python3 (>= 3.5~), python3:any (>= 3.3.2-2~), libc6 (>= 2.14)
Description: HTML/XHTML/XML string library for Python 3
 MarkupSafe is a Python library implementing a unicode subclass that is
 aware of HTML escaping rules. It can be used to implement automatic
 string escaping.
 .
 This package contains the Python 3 version.
Homepage: https://pypi.python.org/pypi/MarkupSafe

Package: libmagic-mgc
Status: install ok installed
Priority: standard
Section: libs
Installed-Size: 4832
Maintainer: Christoph Biedl <debian.axhn@manchmal.in-ulm.de>
Architecture: amd64
Multi-Arch: foreign
Source: file
Version: 1:5.30-1+deb9u3
Replaces: libmagic1 (<< 1:5.28-4~)
Breaks: libmagic1 (<< 1:5.28-4~)
Description: File type determination library using "magic" numbers (compiled magic file)
 This package provides the compiled magic file "magic.mgc". It has
 been separated from libmagic1 in order to meet the multiarch
 requirements without breaking applications that expect this file
 at its absolute path.
Homepage: http://www.darwinsys.com/file/

Package: isc-dhcp-client
Status: install ok installed
Priority: important
Section: net
Installed-Size: 649
Maintainer: Debian ISC DHCP maintainers <pkg-dhcp-devel@lists.alioth.debian.org>
Architecture: amd64
Source: isc-dhcp
Version: 4.3.5-3+deb9u1
Provides: dhcp-client
Depends: libc6 (>= 2.15), libdns-export162, libisc-export160, debianutils (>= 2.8.2), iproute2
Recommends: isc-dhcp-common
Suggests: resolvconf, avahi-autoipd, isc-dhcp-client-ddns
Conffiles:
 /etc/dhcp/debug 521717b5f9e08db15893d3d062c59aeb
 /etc/dhcp/dhclient-exit-hooks.d/rfc3442-classless-routes 95e21c32fa7f603db75f1dc33db53cf5
 /etc/dhcp/dhclient.conf 649563ef7a61912664a400a5263958a6
Description: DHCP client for automatically obtaining an IP address
 This is the Internet Software Consortium's DHCP client.
 .
 Dynamic Host Configuration Protocol (DHCP) is a protocol like BOOTP
 (actually dhcpd includes much of the functionality of bootpd). It
 gives client machines "leases" for IP addresses and can
 automatically set their network configuration. If your machine
 depends on DHCP (especially likely if it's a workstation on a large
 network, or a laptop, or attached to a cable modem), keep this or
 another DHCP client installed.
 .
 Extra documentation can be found in the package isc-dhcp-common.
Homepage: http://www.isc.org

Package: bzip2
Status: install ok installed
Priority: standard
Section: utils
Installed-Size: 184
Maintainer: Anibal Monsalve Salazar <anibal@debian.org>
Architecture: amd64
Multi-Arch: foreign
Version: 1.0.6-8.1
Replaces: libbz2 (<< 0.9.5d-3)
Depends: libbz2-1.0 (= 1.0.6-8.1), libc6 (>= 2.14)
Suggests: bzip2-doc
Description: high-quality block-sorting file compressor - utilities
 bzip2 is a freely available, patent free, high-quality data compressor.
 It typically compresses files to within 10% to 15% of the best available
 techniques, whilst being around twice as fast at compression and six
 times faster at decompression.
 .
 bzip2 compresses files using the Burrows-Wheeler block-sorting text
 compression algorithm, and Huffman coding.  Compression is generally
 considerably better than that achieved by more conventional
 LZ77/LZ78-based compressors, and approaches the performance of the PPM
 family of statistical compressors.
 .
 The archive file format of bzip2 (.bz2) is incompatible with that of its
 predecessor, bzip (.bz).
Homepage: http://www.bzip.org/

Package: libmagic1
Status: install ok installed
Priority: standard
Section: libs
Installed-Size: 214
Maintainer: Christoph Biedl <debian.axhn@manchmal.in-ulm.de>
Architecture: amd64
Multi-Arch: same
Source: file
Version: 1:5.30-1+deb9u3
Depends: libc6 (>= 2.15), zlib1g (>= 1:1.1.4), libmagic-mgc (= 1:5.30-1+deb9u3)
Suggests: file
Conffiles:
 /etc/magic 272913026300e7ae9b5e2d51f138e674
 /etc/magic.mime 272913026300e7ae9b5e2d51f138e674
Description: Recognize the type of data in a file using "magic" numbers - library
 This library can be used to classify files according to magic number
 tests. It implements the core functionality of the file command.
Homepage: http://www.darwinsys.com/file/

Package: lsb-base
Status: install ok installed
Priority: required
Section: misc
Installed-Size: 49
Maintainer: Debian LSB Team <debian-lsb@lists.debian.org>
Architecture: all
Multi-Arch: foreign
Source: lsb
Version: 9.20161125
Description: Linux Standard Base init script functionality
 The Linux Standard Base (http://www.linuxbase.org/) is a standard
 core system that third-party applications written for Linux can
 depend upon.
 .
 This package only includes the init-functions shell library, which
 may be used by other packages' initialization scripts for console
 logging and other purposes.
Homepage: http://www.linuxfoundation.org/collaborate/workgroups/lsb

Package: python3.5-minimal
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 9429
Maintainer: Matthias Klose <doko@debian.org>
Architecture: amd64
Multi-Arch: allowed
Source: python3.5
Version: 3.5.3-1+deb9u3
Depends: libpython3.5-minimal (= 3.5.3-1+deb9u3), libexpat1 (>= 2.1~beta3), zlib1g (>= 1:1.2.0)
Pre-Depends: libc6 (>= 2.17)
Recommends: python3.5
Suggests: binfmt-support
Conflicts: binfmt-support (<< 1.1.2)
Description: Minimal subset of the Python language (version 3.5)
 This package contains the interpreter and some essential modules.  It can
 be used in the boot process for some basic tasks.
 See /usr/share/doc/python3.5-minimal/README.Debian for a list of the modules
 contained in this package.

Package: procps
Status: install ok installed
Priority: important
Section: admin
Installed-Size: 690
Maintainer: Craig Small <csmall@debian.org>
Architecture: amd64
Multi-Arch: foreign
Version: 2:3.3.12-3+deb9u1
Provides: watch
Depends: libc6 (>= 2.15), libncurses5 (>= 6), libncursesw5 (>= 6), libprocps6, libtinfo5 (>= 6), lsb-base (>= 3.0-10), init-system-helpers (>= 1.29~)
Recommends: psmisc
Breaks: guymager (<= 0.5.9-1), open-vm-tools (<= 2011.12.20-562307-1)
Conflicts: pgrep (<< 3.3-5), w-bassman (<< 1.0-3)
Conffiles:
 /etc/init.d/procps 49fbfd237be2a2f09576f1f9374580be
 /etc/sysctl.conf 36547fde818f251846b0198564060927
 /etc/sysctl.d/README.sysctl 026e08987e39bd612ae311f2d9fc2089
Description: /proc file system utilities
 This package provides command line and full screen utilities for browsing
 procfs, a "pseudo" file system dynamically generated by the kernel to
 provide information about the status of entries in its process table
 (such as whether the process is running, stopped, or a "zombie").
 .
 It contains free, kill, pkill, pgrep, pmap, ps, pwdx, skill, slabtop,
 snice, sysctl, tload, top, uptime, vmstat, w, and watch.
Homepage: https://gitlab.com/procps-ng/procps

Package: libgssapi-krb5-2
Status: install ok installed
Priority: standard
Section: libs
Installed-Size: 423
Maintainer: Sam Hartman <hartmans@debian.org>
Architecture: amd64
Multi-Arch: same
Source: krb5
Version: 1.15-1+deb9u2
Depends: libc6 (>= 2.14), libcomerr2 (>= 1.34), libk5crypto3 (>= 1.8+dfsg), libkeyutils1 (>= 1.4), libkrb5-3 (= 1.15-1+deb9u2), libkrb5support0 (>= 1.15~beta1)
Suggests: krb5-doc, krb5-user
Breaks: libgssglue1 (<< 0.2-2)
Conffiles:
 /etc/gss/mech.d/README 27e753ba1dc72900d2892b8efef6e35e
Description: MIT Kerberos runtime libraries - krb5 GSS-API Mechanism
 Kerberos is a system for authenticating users and services on a network.
 Kerberos is a trusted third-party service.  That means that there is a
 third party (the Kerberos server) that is trusted by all the entities on
 the network (users and services, usually called "principals").
 .
 This is the MIT reference implementation of Kerberos V5.
 .
 This package contains the runtime library for the MIT Kerberos
 implementation of GSS-API used by applications and Kerberos clients.
Homepage: http://web.mit.edu/kerberos/

Package: python3-jsonschema
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 170
Maintainer: PKG OpenStack <openstack-devel@lists.alioth.debian.org>
Architecture: all
Source: python-jsonschema
Version: 2.5.1-6
Depends: python3-pkg-resources, python3:any (>= 3.3.2-2~)
Description: An(other) implementation of JSON Schema (Draft 3 and 4) - Python 3.x
 JSON Schema is a specification for a JSON-based format for defining
 the structure of JSON data. JSON Schema provides a contract for what
 JSON data is required for a given application and how it can be
 modified, much like what XML Schema provides for XML. JSON Schema is
 intended to provide validation, documentation, and interaction control
 of JSON data.
 .
 This package contains the Python 3.x module.
Homepage: https://github.com/Julian/jsonschema

Package: xauth
Status: install ok installed
Priority: optional
Section: x11
Installed-Size: 82
Maintainer: Debian X Strike Force <debian-x@lists.debian.org>
Architecture: amd64
Source: xauth (1:1.0.9-1)
Version: 1:1.0.9-1+b2
Depends: libc6 (>= 2.14), libx11-6, libxau6, libxext6, libxmuu1
Description: X authentication utility
 xauth is a small utility to read and manipulate Xauthority files, which
 are used by servers and clients alike to control authentication and access
 to X sessions.

Package: libgpg-error0
Status: install ok installed
Priority: standard
Section: libs
Installed-Size: 572
Maintainer: Debian GnuPG Maintainers <pkg-gnupg-maint@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: same
Source: libgpg-error
Version: 1.26-2
Depends: libc6 (>= 2.15)
Description: library for common error values and messages in GnuPG components
 Library that defines common error values for all GnuPG
 components.  Among these are GPG, GPGSM, GPGME, GPG-Agent, libgcrypt,
 pinentry, SmartCard Daemon and possibly more in the future.
Homepage: https://www.gnupg.org/related_software/libgpg-error/

Package: python3-blinker
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 79
Maintainer: Debian Python Modules Team <python-modules-team@lists.alioth.debian.org>
Architecture: all
Source: blinker
Version: 1.3.dfsg2-1
Depends: python3:any (>= 3.3.2-2~)
Suggests: python-blinker-doc
Description: fast, simple object-to-object and broadcast signaling library
 Blinker provides a fast dispatching system that allows any number of
 interested parties to subscribe to events, or "signals".
 .
 Signal receivers can subscribe to specific senders or receive signals
 sent by any sender.
 .
 This package contains the Python 3 version.
Homepage: http://pythonhosted.org/blinker/

Package: libssl1.0.2
Status: install ok installed
Priority: important
Section: libs
Installed-Size: 3561
Maintainer: Debian OpenSSL Team <pkg-openssl-devel@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: same
Source: openssl1.0
Version: 1.0.2u-1~deb9u4
Depends: libc6 (>= 2.17), debconf (>= 0.5) | debconf-2.0
Description: Secure Sockets Layer toolkit - shared libraries
 This package is part of the OpenSSL project's implementation of the SSL
 and TLS cryptographic protocols for secure communication over the
 Internet.
 .
 It provides the libssl and libcrypto shared libraries.
Homepage: https://www.openssl.org

Package: base-files
Essential: yes
Status: install ok installed
Priority: required
Section: admin
Installed-Size: 333
Maintainer: Santiago Vila <sanvila@debian.org>
Architecture: amd64
Multi-Arch: foreign
Version: 9.9+deb9u13
Replaces: base, dpkg (<= 1.15.0), miscutils
Provides: base
Pre-Depends: awk
Breaks: initscripts (<< 2.88dsf-13.3), sendfile (<< 2.1b.20080616-5.2~)
Conffiles:
 /etc/debian_version 0b5ec6628acace9bde943dce076cbc83
 /etc/dpkg/origins/debian 731423fa8ba067262f8ef37882d1e742
 /etc/host.conf 4eb63731c9f5e30903ac4fc07a7fe3d6
 /etc/issue 62dc6d46260360d4299e3a931afbdce5
 /etc/issue.net 6589b08348fd877fd34398489f62caf0
 /etc/update-motd.d/10-uname 9e1b832b7b06f566156e7c9e0548247b
Description: Debian base system miscellaneous files
 This package contains the basic filesystem hierarchy of a Debian system, and
 several important miscellaneous files, such as /etc/debian_version,
 /etc/host.conf, /etc/issue, /etc/motd, /etc/profile, and others,
 and the text of several common licenses in use on Debian systems.

Package: libyaml-0-2
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 140
Maintainer: Anders Kaseorg <andersk@mit.edu>
Architecture: amd64
Multi-Arch: same
Source: libyaml
Version: 0.1.7-2
Depends: libc6 (>= 2.14)
Description: Fast YAML 1.1 parser and emitter library
 LibYAML is a C library for parsing and emitting data in YAML 1.1, a
 human-readable data serialization format.
Homepage: http://pyyaml.org/wiki/LibYAML

Package: sensible-utils
Status: install ok installed
Priority: required
Section: utils
Installed-Size: 62
Maintainer: Anibal Monsalve Salazar <anibal@debian.org>
Architecture: all
Multi-Arch: foreign
Version: 0.0.9+deb9u1
Replaces: debianutils (<= 2.32.3), manpages-pl (<= 20060617-3~)
Description: Utilities for sensible alternative selection
 This package provides a number of small utilities which are used
 by programs to sensibly select and spawn an appropriate browser,
 editor, or pager.
 .
 The specific utilities included are: sensible-browser sensible-editor
 sensible-pager

Package: python3-pyasn1
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 200
Maintainer: Jan Lübbe <jluebbe@debian.org>
Architecture: all
Source: pyasn1
Version: 0.1.9-2
Depends: python3:any (>= 3.3.2-2~)
Suggests: doc-base
Description: ASN.1 library for Python (Python 3 module)
 This  is  an implementation  of  ASN.1  types  and codecs  in  Python
 programming language. It has been first written to support particular
 protocol (SNMP) but then generalized  to be suitable for a wide range
 of protocols based on ASN.1 specification.
 .
 This package contains the Python 3 module.
Homepage: http://pyasn1.sourceforge.net/

Package: passwd
Status: install ok installed
Priority: required
Section: admin
Installed-Size: 2478
Maintainer: Shadow package maintainers <pkg-shadow-devel@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: foreign
Source: shadow
Version: 1:4.4-4.1
Replaces: manpages-tr (<< 1.0.5), manpages-zh (<< 1.5.1-1)
Depends: libaudit1 (>= 1:2.2.1), libc6 (>= 2.14), libpam0g (>= 0.99.7.1), libselinux1 (>= 1.32), libsemanage1 (>= 2.0.3), libpam-modules
Conffiles:
 /etc/cron.daily/passwd db990990933b6f56322725223f13c2bc
 /etc/default/useradd cc9f9a7713ab62a32cd38363d958f396
 /etc/pam.d/chfn 4d466e00a348ba426130664d795e8afa
 /etc/pam.d/chpasswd 9900720564cb4ee98b7da29e2d183cb2
 /etc/pam.d/chsh a6e9b589e90009334ffd030d819290a6
 /etc/pam.d/newusers 1454e29bfa9f2a10836563e76936cea5
 /etc/pam.d/passwd eaf2ad85b5ccd06cceb19a3e75f40c63
Description: change and administer password and group data
 This package includes passwd, chsh, chfn, and many other programs to
 maintain password and group data.
 .
 Shadow passwords are supported.  See /usr/share/doc/passwd/README.Debian
Homepage: https://github.com/shadow-maint/shadow

Package: init-system-helpers
Essential: yes
Status: install ok installed
Priority: required
Section: admin
Installed-Size: 131
Maintainer: Debian systemd Maintainers <pkg-systemd-maintainers@lists.alioth.debian.org>
Architecture: all
Multi-Arch: foreign
Version: 1.48
Replaces: sysv-rc (<< 2.88dsf-59.3~), sysvinit-utils (<< 2.88dsf-59.3)
Depends: perl-base (>= 5.20.1-3)
Breaks: systemd (<< 44-12), sysvinit-utils (<< 2.88dsf-59.3~)
Conflicts: file-rc (<< 0.8.17~), openrc (<= 0.18.3-1)
Description: helper tools for all init systems
 This package contains helper tools that are necessary for switching between
 the various init systems that Debian contains (e. g. sysvinit or
 systemd). An example is deb-systemd-helper, a script that enables systemd unit
 files without depending on a running systemd.
 .
 It also includes the "service", "invoke-rc.d", and "update-rc.d" scripts which
 provide an abstraction for enabling, disabling, starting, and stopping
 services for all supported Debian init systems as specified by the policy.
 .
 While this package is maintained by pkg-systemd-maintainers, it is NOT
 specific to systemd at all. Maintainers of other init systems are welcome to
 include their helpers in this package.

Package: openssh-server
Status: install ok installed
Priority: optional
Section: net
Installed-Size: 883
Maintainer: Debian OpenSSH Maintainers <debian-ssh@lists.debian.org>
Architecture: amd64
Multi-Arch: foreign
Source: openssh
Version: 1:7.4p1-10+deb9u7
Replaces: ssh, ssh-krb5
Provides: ssh-server
Depends: adduser (>= 3.9), dpkg (>= 1.9.0), libpam-modules (>= 0.72-9), libpam-runtime (>= 0.76-14), lsb-base (>= 4.1+Debian3), openssh-client (= 1:7.4p1-10+deb9u7), openssh-sftp-server, procps, ucf (>= 0.28), debconf (>= 0.5) | debconf-2.0, init-system-helpers (>= 1.18~), libaudit1 (>= 1:2.2.1), libc6 (>= 2.17), libcomerr2 (>= 1.01), libgssapi-krb5-2 (>= 1.14+dfsg), libkrb5-3 (>= 1.13~alpha1+dfsg), libpam0g (>= 0.99.7.1), libselinux1 (>= 1.32), libssl1.0.2 (>= 1.0.2d), libsystemd0, libwrap0 (>= 7.6-4~), zlib1g (>= 1:1.1.4)
Recommends: libpam-systemd, ncurses-term, xauth
Suggests: molly-guard, monkeysphere, rssh, ssh-askpass, ufw
Conflicts: sftp, ssh-socks, ssh2
Conffiles:
 /etc/default/ssh 500e3cf069fe9a7b9936108eb9d9c035
 /etc/init.d/ssh 338975eb635877703fc066e005f916d9
 /etc/init/ssh.conf 6cd55bc913a37a11a5599c4850f865e5
 /etc/network/if-up.d/openssh-server 12a34c77b9032e5b23a63782fcc03fef
 /etc/pam.d/sshd 8b4c7a12b031424b2a9946881da59812
 /etc/ufw/applications.d/openssh-server 486b78d54b93cc9fdc950c1d52ff479e
Description: secure shell (SSH) server, for secure access from remote machines
 This is the portable version of OpenSSH, a free implementation of
 the Secure Shell protocol as specified by the IETF secsh working
 group.
 .
 Ssh (Secure Shell) is a program for logging into a remote machine
 and for executing commands on a remote machine.
 It provides secure encrypted communications between two untrusted
 hosts over an insecure network. X11 connections and arbitrary TCP/IP
 ports can also be forwarded over the secure channel.
 It can be used to provide applications with a secure communication
 channel.
 .
 This package provides the sshd server.
 .
 In some countries it may be illegal to use any encryption at all
 without a special permit.
 .
 sshd replaces the insecure rshd program, which is obsolete for most
 purposes.
Homepage: http://www.openssh.com/

Package: openssh-sftp-server
Status: install ok installed
Priority: optional
Section: net
Installed-Size: 106
Maintainer: Debian OpenSSH Maintainers <debian-ssh@lists.debian.org>
Architecture: amd64
Source: openssh
Version: 1:7.4p1-10+deb9u7
Replaces: openssh-server (<< 1:6.5p1-5)
Depends: openssh-client (= 1:7.4p1-10+deb9u7), libc6 (>= 2.17)
Recommends: openssh-server | ssh-server
Breaks: openssh-server (<< 1:6.5p1-5)
Enhances: openssh-server, ssh-server
Description: secure shell (SSH) sftp server module, for SFTP access from remote machines
 This is the portable version of OpenSSH, a free implementation of
 the Secure Shell protocol as specified by the IETF secsh working
 group.
 .
 Ssh (Secure Shell) is a program for logging into a remote machine
 and for executing commands on a remote machine.
 It provides secure encrypted communications between two untrusted
 hosts over an insecure network. X11 connections and arbitrary TCP/IP
 ports can also be forwarded over the secure channel.
 It can be used to provide applications with a secure communication
 channel.
 .
 This package provides the SFTP server module for the SSH server. It
 is needed if you want to access your SSH server with SFTP. The SFTP
 server module also works with other SSH daemons like dropbear.
 .
 OpenSSH's sftp and sftp-server implement revision 3 of the SSH filexfer
 protocol described in:
 .
  http://www.openssh.com/txt/draft-ietf-secsh-filexfer-02.txt
 .
 Newer versions of the draft will not be supported, though some features
 are individually implemented as extensions.
Homepage: http://www.openssh.com/

Package: ncurses-base
Essential: yes
Status: install ok installed
Priority: required
Section: misc
Installed-Size: 340
Maintainer: Craig Small <csmall@debian.org>
Architecture: all
Multi-Arch: foreign
Source: ncurses
Version: 6.0+20161126-1+deb9u2
Provides: ncurses-runtime
Breaks: ncurses-term (<< 5.7+20100313-3)
Conffiles:
 /etc/terminfo/README 45b6df19fb5e21f55717482fa7a30171
Description: basic terminal type definitions
 The ncurses library routines are a terminal-independent method of
 updating character screens with reasonable optimization.
 .
 This package contains terminfo data files to support the most common types of
 terminal, including ansi, dumb, linux, rxvt, screen, sun, vt100, vt102, vt220,
 vt52, and xterm.
Homepage: http://invisible-island.net/ncurses/

Package: krb5-locales
Status: install ok installed
Priority: standard
Section: localization
Installed-Size: 302
Maintainer: Sam Hartman <hartmans@debian.org>
Architecture: all
Multi-Arch: foreign
Source: krb5
Version: 1.15-1+deb9u2
Description: internationalization support for MIT Kerberos
 Kerberos is a system for authenticating users and services on a network.
 Kerberos is a trusted third-party service.  That means that there is a
 third party (the Kerberos server) that is trusted by all the entities on
 the network (users and services, usually called "principals").
 .
 This is the MIT reference implementation of Kerberos V5.
 .
 This package contains internationalized messages for MIT Kerberos.
Homepage: http://web.mit.edu/kerberos/

Package: libc-bin
Essential: yes
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 3366
Maintainer: GNU Libc Maintainers <debian-glibc@lists.debian.org>
Architecture: amd64
Multi-Arch: foreign
Source: glibc
Version: 2.24-11+deb9u4
Depends: libc6 (>> 2.24), libc6 (<< 2.25)
Recommends: manpages
Conffiles:
 /etc/bindresvport.blacklist 4c09213317e4e3dd3c71d74404e503c5
 /etc/default/nss d6d5d6f621fb3ead2548076ce81e309c
 /etc/gai.conf 28fa76ff5a9e0566eaa1e11f1ce51f09
 /etc/ld.so.conf 4317c6de8564b68d628c21efa96b37e4
 /etc/ld.so.conf.d/libc.conf d4d833fd095fb7b90e1bb4a547f16de6
Description: GNU C Library: Binaries
 This package contains utility programs related to the GNU C Library.
 .
  * catchsegv: catch segmentation faults in programs
  * getconf: query system configuration variables
  * getent: get entries from administrative databases
  * iconv, iconvconfig: convert between character encodings
  * ldd, ldconfig: print/configure shared library dependencies
  * locale, localedef: show/generate locale definitions
  * tzselect, zdump, zic: select/dump/compile time zones
Homepage: http://www.gnu.org/software/libc/libc.html

Package: libsemanage1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 291
Maintainer: Debian SELinux maintainers <selinux-devel@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: same
Source: libsemanage
Version: 2.6-2
Depends: libsemanage-common (= 2.6-2), libaudit1 (>= 1:2.2.1), libbz2-1.0, libc6 (>= 2.14), libselinux1 (>= 2.6), libsepol1 (>= 2.6), libustr-1.0-1 (>= 1.0.4)
Breaks: policycoreutils (<< 2.4), selinux-policy-default (<< 2:2.20140421-10~), selinux-policy-mls (<< 2:2.20140421-10~)
Description: SELinux policy management library
 This package provides the shared libraries for SELinux policy management.
 It uses libsepol for binary policy manipulation and libselinux for
 interacting with the SELinux system.  It also exec's helper programs
 for loading policy and for checking whether the file_contexts
 configuration is valid (load_policy and setfiles from
 policycoreutils) presently, although this may change at least for the
 bootstrapping case
 .
 Security-enhanced Linux is a patch of the Linux kernel and a
 number of utilities with enhanced security functionality designed to
 add mandatory access controls to Linux.  The Security-enhanced Linux
 kernel contains new architectural components originally developed to
 improve the security of the Flask operating system. These
 architectural components provide general support for the enforcement
 of many kinds of mandatory access control policies, including those
 based on the concepts of Type Enforcement, Role-based Access
 Control, and Multi-level Security.
Homepage: http://userspace.selinuxproject.org/

Package: libatm1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 105
Maintainer: Debian QA Group <packages@qa.debian.org>
Architecture: amd64
Multi-Arch: same
Source: linux-atm
Version: 1:2.5.1-2
Depends: libc6 (>= 2.14)
Conflicts: atm-tools (<< 2.4.1-6)
Description: shared library for ATM (Asynchronous Transfer Mode)
 Shared libraries needed by ATM (Asynchronous Transfer Mode) related programs
Homepage: http://linux-atm.sourceforge.net/

Package: python3-oauthlib
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 437
Maintainer: Debian Python Modules Team <python-modules-team@lists.alioth.debian.org>
Architecture: all
Source: python-oauthlib
Version: 2.0.1-1
Depends: python3:any (>= 3.3.2-2~), python3-blinker, python3-cryptography, python3-jwt (>= 1.0.0)
Description: generic, spec-compliant implementation of OAuth for Python3
 OAuthLib is a generic utility which implements the logic of OAuth without
 assuming a specific HTTP request object. It can be used to graft OAuth support
 onto HTTP libraries.
 .
 OAuth1 is almost complete while OAuth2 is already in the works.
 .
 This package contains the Python 3 version of the library.
Homepage: https://github.com/idan/oauthlib

Package: libseccomp2
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 297
Maintainer: Kees Cook <kees@debian.org>
Architecture: amd64
Multi-Arch: same
Source: libseccomp
Version: 2.3.1-2.1+deb9u1
Depends: libc6 (>= 2.14)
Description: high level interface to Linux seccomp filter
 This library provides a high level interface to constructing, analyzing
 and installing seccomp filters via a BPF passed to the Linux Kernel's
 prctl() syscall.
Homepage: https://github.com/seccomp/libseccomp

Package: libxtables12
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 135
Maintainer: Arturo Borrero Gonzalez <arturo@debian.org>
Architecture: amd64
Multi-Arch: same
Source: iptables
Version: 1.6.0+snapshot20161117-6
Replaces: iptables (<< 1.4.16.3-3), libxtables11 (>= 1.6.0+snapshot20161117-1)
Depends: libc6 (>= 2.14)
Breaks: iptables (<< 1.4.16.3-3), libxtables11 (>= 1.6.0+snapshot20161117-1)
Description: netfilter xtables library
 The user-space interface to the Netfilter xtables kernel framework.
Homepage: http://www.netfilter.org/

Package: libapparmor1
Status: install ok installed
Priority: extra
Section: libs
Installed-Size: 140
Maintainer: Debian AppArmor Team <pkg-apparmor-team@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: same
Source: apparmor
Version: 2.11.0-3+deb9u2
Depends: libc6 (>= 2.17)
Description: changehat AppArmor library
 This package provides the shared library used for making use of the
 AppArmor profile and changehat functionality, as well as common log
 parsing routines.
Homepage: http://apparmor.net/

Package: python3-chardet
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 496
Maintainer: Piotr Ożarowski <piotr@debian.org>
Architecture: all
Source: chardet
Version: 2.3.0-2
Depends: python3:any (>= 3.3.2-2~), python3-pkg-resources
Description: universal character encoding detector for Python3
 Chardet takes a sequence of bytes in an unknown character encoding, and
 attempts to determine the encoding.
 .
 Supported encodings:
  * ASCII, UTF-8, UTF-16 (2 variants), UTF-32 (4 variants)
  * Big5, GB2312, EUC-TW, HZ-GB-2312, ISO-2022-CN (Traditional and Simplified
    Chinese)
  * EUC-JP, SHIFT_JIS, ISO-2022-JP (Japanese)
  * EUC-KR, ISO-2022-KR (Korean)
  * KOI8-R, MacCyrillic, IBM855, IBM866, ISO-8859-5, windows-1251 (Cyrillic)
  * ISO-8859-2, windows-1250 (Hungarian)
  * ISO-8859-5, windows-1251 (Bulgarian)
  * windows-1252 (English)
  * ISO-8859-7, windows-1253 (Greek)
  * ISO-8859-8, windows-1255 (Visual and Logical Hebrew)
  * TIS-620 (Thai)
 .
 This library is a port of the auto-detection code in Mozilla.
 .
 This package contains the Python 3 version of the library.
Homepage: https://github.com/chardet/chardet

Package: libssl1.1
Status: install ok installed
Priority: important
Section: libs
Installed-Size: 3561
Maintainer: Debian OpenSSL Team <pkg-openssl-devel@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: same
Source: openssl
Version: 1.1.0l-1~deb9u3
Depends: libc6 (>= 2.17), debconf (>= 0.5) | debconf-2.0
Breaks: salt-common (<= 2016.3.3+ds-3)
Description: Secure Sockets Layer toolkit - shared libraries
 This package is part of the OpenSSL project's implementation of the SSL
 and TLS cryptographic protocols for secure communication over the
 Internet.
 .
 It provides the libssl and libcrypto shared libraries.
Homepage: https://www.openssl.org/

Package: sysvinit-utils
Essential: yes
Status: install ok installed
Priority: required
Section: admin
Installed-Size: 110
Maintainer: Debian sysvinit maintainers <pkg-sysvinit-devel@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: foreign
Source: sysvinit
Version: 2.88dsf-59.9
Replaces: initscripts (<< 2.88dsf-59.5)
Depends: libc6 (>= 2.14), init-system-helpers (>= 1.25~), util-linux (>> 2.28-2~)
Breaks: systemd (<< 215)
Description: System-V-like utilities
 This package contains the important System-V-like utilities.
 .
 Specifically, this package includes:
 killall5, pidof
Homepage: http://savannah.nongnu.org/projects/sysvinit

Package: xz-utils
Status: install ok installed
Priority: required
Section: utils
Installed-Size: 516
Maintainer: Jonathan Nieder <jrnieder@gmail.com>
Architecture: amd64
Multi-Arch: foreign
Source: xz-utils (5.2.2-1.2)
Version: 5.2.2-1.2+b1
Replaces: lzip (<< 1.8~rc2), xz-lzma
Provides: lzma
Depends: libc6 (>= 2.17), liblzma5 (>= 5.2.2)
Breaks: lzip (<< 1.8~rc2)
Conflicts: lzma (<< 9.22-1), xz-lzma
Description: XZ-format compression utilities
 XZ is the successor to the Lempel-Ziv/Markov-chain Algorithm
 compression format, which provides memory-hungry but powerful
 compression (often better than bzip2) and fast, easy decompression.
 .
 This package provides the command line tools for working with XZ
 compression, including xz, unxz, xzcat, xzgrep, and so on. They can
 also handle the older LZMA format, and if invoked via appropriate
 symlinks will emulate the behavior of the commands in the lzma
 package.
 .
 The XZ format is similar to the older LZMA format but includes some
 improvements for general use:
 .
  * 'file' magic for detecting XZ files;
  * crc64 data integrity check;
  * limited random-access reading support;
  * improved support for multithreading (not used in xz-utils);
  * support for flushing the encoder.
Homepage: http://tukaani.org/xz/

Package: debian-archive-keyring
Status: install ok installed
Priority: important
Section: misc
Installed-Size: 148
Maintainer: Debian Release Team <packages@release.debian.org>
Architecture: all
Multi-Arch: foreign
Version: 2017.5+deb9u1
Depends: gpgv
Recommends: gnupg
Breaks: apt (<< 0.7.25.1)
Conffiles:
 /etc/apt/trusted.gpg.d/debian-archive-buster-automatic.gpg b53e6ca4ed295fc38621315853f623d0
 /etc/apt/trusted.gpg.d/debian-archive-buster-security-automatic.gpg 34933237e27e02ca0f55aab2550c23f1
 /etc/apt/trusted.gpg.d/debian-archive-buster-stable.gpg 0baf1e6d0f61a85b7b7fd0fa6c25bd22
 /etc/apt/trusted.gpg.d/debian-archive-jessie-automatic.gpg 548a861c55fdf06fb9b0419c30cd33ec
 /etc/apt/trusted.gpg.d/debian-archive-jessie-security-automatic.gpg 28ffc0824518a9d42fb40e5caad7c5ef
 /etc/apt/trusted.gpg.d/debian-archive-jessie-stable.gpg 3cf5c69a2532cc3a3cba6c5bcf02cb7b
 /etc/apt/trusted.gpg.d/debian-archive-stretch-automatic.gpg c82e16869fb2d6234aff8b63fa00fb65
 /etc/apt/trusted.gpg.d/debian-archive-stretch-security-automatic.gpg 9fcd290147d1ed6b6768c1d1163f1383
 /etc/apt/trusted.gpg.d/debian-archive-stretch-stable.gpg 829333ce438185f23bd9c122a19ef25d
Description: GnuPG archive keys of the Debian archive
 The Debian project digitally signs its Release files. This package
 contains the archive keys used for that.

Package: python3-jinja2
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 810
Maintainer: Piotr Ożarowski <piotr@debian.org>
Architecture: all
Source: jinja2
Version: 2.8-1
Depends: python3-markupsafe, python3:any (>= 3.3.2-2~)
Recommends: python3-pkg-resources
Suggests: python-jinja2-doc
Description: small but fast and easy to use stand-alone template engine
 Jinja2 is a template engine written in pure Python. It provides a Django
 inspired non-XML syntax but supports inline expressions and an optional
 sandboxed environment.
 .
 The key-features are:
  * Configurable syntax. If you are generating LaTeX or other formats with
    Jinja2 you can change the delimiters to something that integrates better
    into the LaTeX markup.
  * Fast. While performance is not the primarily target of Jinja2 it’s
    surprisingly fast. The overhead compared to regular Python code was reduced
    to the very minimum.
  * Easy to debug. Jinja2 integrates directly into the Python traceback system
    which allows you to debug Jinja2 templates with regular Python debugging
    helpers.
  * Secure. It’s possible to evaluate untrusted template code if the optional
    sandbox is enabled. This allows Jinja2 to be used as templating language
    for applications where users may modify the template design.
Homepage: http://jinja.pocoo.org/

Package: libc-l10n
Status: install ok installed
Priority: standard
Section: localization
Installed-Size: 4211
Maintainer: GNU Libc Maintainers <debian-glibc@lists.debian.org>
Architecture: all
Multi-Arch: foreign
Source: glibc
Version: 2.24-11+deb9u4
Replaces: locales (<< 2.21-1)
Breaks: locales (<< 2.21-1)
Description: GNU C Library: localization files
 This package contains the translation files for the GNU C library and
 utility programs.
Homepage: http://www.gnu.org/software/libc/libc.html

Package: libsemanage-common
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 39
Maintainer: Debian SELinux maintainers <selinux-devel@lists.alioth.debian.org>
Architecture: all
Multi-Arch: foreign
Source: libsemanage
Version: 2.6-2
Replaces: libsemanage1 (<= 2.0.41-1), libsemanage1-dev (<< 2.1.6-3~)
Breaks: libsemanage1 (<= 2.0.41-1), libsemanage1-dev (<< 2.1.6-3~)
Conffiles:
 /etc/selinux/semanage.conf f6f9b97af233c90ca127f406fb6f0932
Description: Common files for SELinux policy management libraries
 This package provides the common files used by the shared libraries
 for SELinux policy management.
 .
 Security-enhanced Linux is a patch of the Linux kernel and a
 number of utilities with enhanced security functionality designed to
 add mandatory access controls to Linux.  The Security-enhanced Linux
 kernel contains new architectural components originally developed to
 improve the security of the Flask operating system. These
 architectural components provide general support for the enforcement
 of many kinds of mandatory access control policies, including those
 based on the concepts of Type Enforcement, Role-based Access
 Control, and Multi-level Security.
Homepage: http://userspace.selinuxproject.org/

Package: python3-minimal
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 120
Maintainer: Matthias Klose <doko@debian.org>
Architecture: amd64
Multi-Arch: allowed
Source: python3-defaults
Version: 3.5.3-1
Replaces: python3 (<< 3.3.2-13~), python3.1 (<< 3.1-2)
Depends: python3.5-minimal (>= 3.5.3-1~), dpkg (>= 1.13.20)
Breaks: idle3 (<< 3.1), python3 (<< 3.3.2-13~), python3-all (<< 3.1), python3-all-dbg (<< 3.1), python3-all-dev (<< 3.1), python3-dbg (<< 3.1), python3-dev (<< 3.1), python3-examples (<< 3.1)
Description: minimal subset of the Python language (default python3 version)
 This package contains the interpreter and some essential modules.  It's used
 in the boot process for some basic tasks.
 See /usr/share/doc/python3.5-minimal/README.Debian for a list of the modules
 contained in this package.
Homepage: http://www.python.org/

Package: gdisk
Status: install ok installed
Priority: extra
Section: admin
Installed-Size: 754
Maintainer: Guillaume Delacour <gui@iroqwa.org>
Architecture: amd64
Version: 1.0.1-1+deb9u1
Depends: libc6 (>= 2.14), libgcc1 (>= 1:3.0), libncursesw5 (>= 6), libpopt0 (>= 1.14), libstdc++6 (>= 5.2), libtinfo5 (>= 6), libuuid1 (>= 2.16)
Recommends: groff-base
Description: GPT fdisk text-mode partitioning tool
 GPT fdisk (aka gdisk) is a text-mode partitioning
 tool that works on Globally Unique Identifier
 (GUID) Partition Table (GPT) disks, rather than
 on the more common (through 2009)
 Master Boot Record (MBR) partition tables.
Homepage: http://sourceforge.net/projects/gptfdisk/

Package: libdebconfclient0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 67
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: cdebconf
Version: 0.227
Depends: libc6 (>= 2.4)
Description: Debian Configuration Management System (C-implementation library)
 Debconf is a configuration management system for Debian packages. It is
 used by some packages to prompt you for information before they are
 installed. cdebconf is a reimplementation of the original debconf in C.
 .
 This library allows C programs to interface with cdebconf.

Package: python3-jsonpatch
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 56
Maintainer: PKG OpenStack <openstack-devel@lists.alioth.debian.org>
Architecture: all
Source: python-json-patch
Version: 1.19-4
Replaces: python3-json-patch (<< 1.3-3~)
Depends: python3-json-pointer (>= 1.9), python3:any (>= 3.3.2-2~)
Breaks: python3-json-patch (<< 1.3-3~)
Description: library to apply JSON patches - Python 3.x
 Python-json-patch is a Python module (a library) to apply JSON Patches
 according to the IETF draft specification.
 .
 From the IETF site:
 .
 JavaScript Object Notation (JSON) [RFC4627] is a common format for the
 exchange and storage of structured data.  HTTP PATCH [RFC5789] extends the
 Hypertext Transfer Protocol (HTTP) [RFC2616] with a method to perform partial
 modifications to resources.
 .
 JSON Patch is a format (identified by the media type "application/
 json-patch") for expressing a sequence of operations to apply to a target JSON
 document, suitable for use with the HTTP PATCH method.
 .
 This format is also potentially useful in other cases when it's necessary to
 make partial updates to a JSON document.
 .
 This package provides the Python 3.x module.
Homepage: https://github.com/stefankoegl/python-json-patch

Package: libselinux1
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 209
Maintainer: Debian SELinux maintainers <selinux-devel@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: same
Source: libselinux (2.6-3)
Version: 2.6-3+b3
Depends: libc6 (>= 2.14), libpcre3
Description: SELinux runtime shared libraries
 This package provides the shared libraries for Security-enhanced
 Linux that provides interfaces (e.g. library functions for the
 SELinux kernel APIs like getcon(), other support functions like
 getseuserbyname()) to SELinux-aware applications. Security-enhanced
 Linux is a patch of the Linux kernel and a number of utilities with
 enhanced security functionality designed to add mandatory access
 controls to Linux.  The Security-enhanced Linux kernel contains new
 architectural components originally developed to improve the security
 of the Flask operating system. These architectural components provide
 general support for the enforcement of many kinds of mandatory access
 control policies, including those based on the concepts of Type
 Enforcement, Role-based Access Control, and Multi-level Security.
 .
 libselinux1 provides an API for SELinux applications to get and set
 process and file security contexts and to obtain security policy
 decisions.  Required for any applications that use the SELinux
 API. libselinux may use the shared libsepol to manipulate the binary
 policy if necessary (e.g. to downgrade the policy format to an older
 version supported by the kernel) when loading policy.
Homepage: http://userspace.selinuxproject.org/

Package: systemd
Status: install ok triggers-pending
Priority: important
Section: admin
Installed-Size: 9293
Maintainer: Debian systemd Maintainers <pkg-systemd-maintainers@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: foreign
Version: 232-25+deb9u12
Replaces: udev (<< 228-5)
Depends: libacl1 (>= 2.2.51-8), libapparmor1 (>= 2.9.0-3+exp2), libaudit1 (>= 1:2.2.1), libblkid1 (>= 2.19.1), libc6 (>= 2.17), libcap2 (>= 1:2.10), libcryptsetup4 (>= 2:1.4.3), libgcrypt20 (>= 1.7.0), libgpg-error0 (>= 1.14), libidn11 (>= 1.13), libip4tc0 (>= 1.6.0+snapshot20161117), libkmod2 (>= 5~), liblz4-1 (>= 0.0~r127), liblzma5 (>= 5.1.1alpha+20120614), libmount1 (>= 2.26.2), libpam0g (>= 0.99.7.1), libseccomp2 (>= 2.3.1), libselinux1 (>= 2.1.9), libsystemd0 (= 232-25+deb9u12), util-linux (>= 2.27.1), mount (>= 2.26), adduser, procps
Pre-Depends: libc6 (>= 2.8)
Recommends: libpam-systemd, dbus
Suggests: systemd-ui, systemd-container, policykit-1
Breaks: adjtimex (<< 1.29-6), aoetools (<< 36-1.1), apparmor (<< 2.10.95-1), arno-iptables-firewall (<< 2.0.1.f-1), atm-tools (<< 1:2.5.1-1.6), clvm (<< 2.02.156-1), cman (<< 3.1.8-1.3+rm), console-common (<< 0.7.89), ebtables (<< 2.0.10.4-3.5), eeepc-acpi-scripts (<< 1.1.12+nmu1), espeakup (<< 1:0.71-27.1), ferm (<< 2.2-3.1), fiaif (<< 1.23.1-4+rm), gfs2-cluster (<< 3.1.8-1), gfs2-utils (<< 3.1.8-1), gom (<< 0.30.2-7), hdparm (<< 9.48+ds-1), ifrename (<< 30~pre9-9), ifscheme (<< 1.7-4), ifupdown (<< 0.8.5~), ifupdown-extra (<< 0.27), ipsec-tools (<< 1:0.8.2+20140711-6), kbd (<< 2.0.3-2), keyboard-configuration (<< 1.141), laptop-mode-tools (<< 1.68~), live-tools (<< 1:20151214+nmu1), lvm2 (<< 2.02.104-1), mdadm (<< 3.4-2), mt-st (<< 1.3-1), multipath-tools (<< 0.5.0+git1.656f8865-3), natlog (<< 1.02.00-4), nbd-client (<< 1:3.14-1), netenv (<< 0.94.3-30+rm), nfs-common (<< 1:1.2.8-9.1), ocfs2-tools (<< 1.8.4-2), pidentd (<< 3.0.19.ds1-7.1), rdnssd (<< 1.0.1-5), rgmanager (<< 3.1.8-1.3+rm), rpcbind (<< 0.2.3-0.1), screen (<< 4.3.1-2), scsitools (<< 0.12-2.3), selinux-basics (<< 0.5.3), setserial (<< 2.17-49), shorewall (<< 5.0.3.1-1), shorewall-init (<< 5.0.3.1-1), shorewall-lite (<< 5.0.3.1-1), shorewall6 (<< 5.0.3.1-1), shorewall6-lite (<< 5.0.3.1-1), srptools (<< 1.0.3-1), switchconf (<< 0.0.15-1), systemd-shim (<< 10-3~), udev (<< 228-5), ufw (<< 0.34-1), virtualbox-guest-x11 (<< 5.0.12-dfsg-2), zfs-fuse (<< 0.7.0-13.1), zvbi (<< 0.2.35-10)
Conffiles:
 /etc/dbus-1/system.d/org.freedesktop.hostname1.conf f55c94d000b5d62b5f06d38852977dd1
 /etc/dbus-1/system.d/org.freedesktop.locale1.conf 5893ab03e7e96aa3759baceb4dd04190
 /etc/dbus-1/system.d/org.freedesktop.login1.conf e2c3673cc09b6340fab20b1e21e80de4
 /etc/dbus-1/system.d/org.freedesktop.network1.conf 162e9a90d8f824f79ef2c6390827ec7b
 /etc/dbus-1/system.d/org.freedesktop.resolve1.conf 6969148b4616c56a5c9065cec5ab0775
 /etc/dbus-1/system.d/org.freedesktop.systemd1.conf c93c16e793f7254a38ce54df08807954
 /etc/dbus-1/system.d/org.freedesktop.timedate1.conf 682369fbf3de26b21e775732c89a2bbe
 /etc/dhcp/dhclient-exit-hooks.d/timesyncd a891f21f45b0648b7082d999bf424591
 /etc/pam.d/systemd-user 3d97692a0125712fcfbd7ddf756f7696
 /etc/systemd/journald.conf b89a22c219efce8b3700feafc61e0c18
 /etc/systemd/logind.conf aeeac805b4bfb7450183ce346999dd38
 /etc/systemd/resolved.conf 6fcc0661ab26fdea8fc71c7af82e5fa9
 /etc/systemd/system.conf adc308320471c75a60e07184cf2ebb05
 /etc/systemd/timesyncd.conf 54914cf38ff3b8f7dc81b87bb3849520
 /etc/systemd/user.conf 675370e2d80a4ad957202e68c1b4aaee
Description: system and service manager
 systemd is a system and service manager for Linux. It provides aggressive
 parallelization capabilities, uses socket and D-Bus activation for starting
 services, offers on-demand starting of daemons, keeps track of processes using
 Linux control groups, maintains mount and automount points and implements an
 elaborate transactional dependency-based service control logic.
 .
 systemd is compatible with SysV and LSB init scripts and can work as a
 drop-in replacement for sysvinit.
 .
 Installing the systemd package will not switch your init system unless you
 boot with init=/bin/systemd or install systemd-sysv in addition.
Triggers-Pending: /etc/init.d
Homepage: https://www.freedesktop.org/wiki/Software/systemd

Package: dpkg
Essential: yes
Status: install ok installed
Priority: required
Section: admin
Installed-Size: 6778
Origin: debian
Maintainer: Dpkg Developers <debian-dpkg@lists.debian.org>
Bugs: debbugs://bugs.debian.org
Architecture: amd64
Multi-Arch: foreign
Version: 1.18.25
Replaces: manpages-it (<< 2.80-4)
Depends: tar (>= 1.28-1)
Pre-Depends: libbz2-1.0, libc6 (>= 2.14), liblzma5 (>= 5.2.2), libselinux1 (>= 2.3), zlib1g (>= 1:1.1.4)
Suggests: apt, debsig-verify
Breaks: acidbase (<= 1.4.5-4), amule (<< 2.3.1+git1a369e47-3), beep (<< 1.3-4), im (<< 1:151-4), libdpkg-perl (<< 1.18.11), netselect (<< 0.3.ds1-27), pconsole (<< 1.0-12), phpgacl (<< 3.3.7-7.3), pure-ftpd (<< 1.0.43-1), systemtap (<< 2.8-1), terminatorx (<< 4.0.1-1), xvt (<= 2.1-20.1)
Conffiles:
 /etc/alternatives/README 69c4ba7f08363e998e0f2e244a04f881
 /etc/cron.daily/dpkg b8065b6bfc248caba501c3f5bb508e66
 /etc/dpkg/dpkg.cfg f4413ffb515f8f753624ae3bb365b81b
 /etc/logrotate.d/dpkg 782ea5ae536f67ff51dc8c3e2eeb4cf9
Description: Debian package management system
 This package provides the low-level infrastructure for handling the
 installation and removal of Debian software packages.
 .
 For Debian package development tools, install dpkg-dev.
Homepage: https://wiki.debian.org/Teams/Dpkg

Package: openssl
Status: install ok installed
Priority: optional
Section: utils
Installed-Size: 1315
Maintainer: Debian OpenSSL Team <pkg-openssl-devel@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: foreign
Version: 1.1.0l-1~deb9u3
Depends: libc6 (>= 2.15), libssl1.1 (>= 1.1.0)
Suggests: ca-certificates
Conffiles:
 /etc/ssl/openssl.cnf f697ef5df0d006882e6326606e8dbf4a
Description: Secure Sockets Layer toolkit - cryptographic utility
 This package is part of the OpenSSL project's implementation of the SSL
 and TLS cryptographic protocols for secure communication over the
 Internet.
 .
 It contains the general-purpose command line binary /usr/bin/openssl,
 useful for cryptographic operations such as:
  * creating RSA, DH, and DSA key parameters;
  * creating X.509 certificates, CSRs, and CRLs;
  * calculating message digests;
  * encrypting and decrypting with ciphers;
  * testing SSL/TLS clients and servers;
  * handling S/MIME signed or encrypted mail.
Homepage: https://www.openssl.org/

Package: vim-common
Status: install ok installed
Priority: important
Section: editors
Installed-Size: 276
Maintainer: Debian Vim Maintainers <pkg-vim-maintainers@lists.alioth.debian.org>
Architecture: all
Source: vim
Version: 2:8.0.0197-4+deb9u3
Replaces: vim-gui-common (<< 2:7.4.488-4~)
Depends: xxd
Recommends: vim | vim-gtk | vim-gtk3 | vim-athena | vim-nox | vim-tiny
Breaks: vim-gui-common (<< 2:7.4.488-4~)
Conffiles:
 /etc/vim/vimrc 00311318b37b5b8a101c136ac1e78b0b
Description: Vi IMproved - Common files
 Vim is an almost compatible version of the UNIX editor Vi.
 .
 This package contains files shared by all non GUI-enabled vim variants
 available in Debian.  Examples of such shared files are: manpages and
 configuration files.
Homepage: http://www.vim.org/

Package: libsqlite3-0
Status: install ok installed
Priority: standard
Section: libs
Installed-Size: 1163
Maintainer: Laszlo Boszormenyi (GCS) <gcs@debian.org>
Architecture: amd64
Multi-Arch: same
Source: sqlite3
Version: 3.16.2-5+deb9u3
Depends: libc6 (>= 2.14)
Description: SQLite 3 shared library
 SQLite is a C library that implements an SQL database engine.
 Programs that link with the SQLite library can have SQL database
 access without running a separate RDBMS process.
Homepage: http://www.sqlite.org/

Package: python3-requests
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 507
Maintainer: Debian Python Modules Team <python-modules-team@lists.alioth.debian.org>
Architecture: all
Source: requests
Version: 2.12.4-1
Depends: python3-urllib3 (<< 1.19.2), python3:any (>= 3.3.2-2~), ca-certificates, python3-chardet, python3-urllib3 (>= 1.19.1)
Suggests: python3-cryptography, python3-idna, python3-openssl, python3-socks
Description: elegant and simple HTTP library for Python3, built for human beings
 Requests allow you to send HTTP/1.1 requests. You can add headers, form data,
 multipart files, and parameters with simple Python dictionaries, and access
 the response data in the same way. It's powered by httplib and urllib3, but
 it does all the hard work and crazy hacks for you.
 .
 Features
 .
   - International Domains and URLs
   - Keep-Alive & Connection Pooling
   - Sessions with Cookie Persistence
   - Browser-style SSL Verification
   - Basic/Digest Authentication
   - Elegant Key/Value Cookies
   - Automatic Decompression
   - Unicode Response Bodies
   - Multipart File Uploads
   - Connection Timeouts
 .
 This package contains the Python 3 version of the library.
Homepage: http://python-requests.org

Package: apt
Status: install ok installed
Priority: important
Section: admin
Installed-Size: 3539
Maintainer: APT Development Team <deity@lists.debian.org>
Architecture: amd64
Version: 1.4.11
Replaces: apt-utils (<< 1.3~exp2~)
Depends: adduser, gpgv | gpgv2 | gpgv1, debian-archive-keyring, init-system-helpers (>= 1.18~), libapt-pkg5.0 (>= 1.3~rc2), libc6 (>= 2.15), libgcc1 (>= 1:3.0), libstdc++6 (>= 5.2)
Recommends: gnupg | gnupg2 | gnupg1
Suggests: apt-doc, aptitude | synaptic | wajig, dpkg-dev (>= 1.17.2), powermgmt-base, python-apt
Breaks: apt-utils (<< 1.3~exp2~)
Conffiles:
 /etc/apt/apt.conf.d/01autoremove 0b1391c01d75f95fa4ea5ac01219b515
 /etc/cron.daily/apt-compat bc4a71cbcaeed4179f25d798257fa980
 /etc/kernel/postinst.d/apt-auto-removal 4ad976a68f045517cf4696cec7b8aa3a
 /etc/logrotate.d/apt 179f2ed4f85cbaca12fa3d69c2a4a1c3
Description: commandline package manager
 This package provides commandline tools for searching and
 managing as well as querying information about packages
 as a low-level access to all features of the libapt-pkg library.
 .
 These include:
  * apt-get for retrieval of packages and information about them
    from authenticated sources and for installation, upgrade and
    removal of packages together with their dependencies
  * apt-cache for querying available information about installed
    as well as installable packages
  * apt-cdrom to use removable media as a source for packages
  * apt-config as an interface to the configuration settings
  * apt-key as an interface to manage authentication keys

Package: dmsetup
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 236
Maintainer: Debian LVM Team <pkg-lvm-maintainers@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: foreign
Source: lvm2 (2.02.168-2)
Version: 2:1.02.137-2
Depends: libc6 (>= 2.14), libdevmapper1.02.1 (>= 2:1.02.131)
Description: Linux Kernel Device Mapper userspace library
 The Linux Kernel Device Mapper is the LVM (Linux Logical Volume Management)
 Team's implementation of a minimalistic kernel-space driver that handles
 volume management, while keeping knowledge of the underlying device layout
 in user-space.  This makes it useful for not only LVM, but software raid,
 and other drivers that create "virtual" block devices.
 .
 This package contains a utility for modifying device mappings.
Homepage: http://sources.redhat.com/lvm2/

Package: diffutils
Essential: yes
Status: install ok installed
Priority: required
Section: utils
Installed-Size: 1327
Maintainer: Santiago Vila <sanvila@debian.org>
Architecture: amd64
Version: 1:3.5-3
Replaces: diff
Pre-Depends: libc6 (>= 2.17)
Suggests: diffutils-doc, wdiff
Description: File comparison utilities
 The diffutils package provides the diff, diff3, sdiff, and cmp programs.
 .
 `diff' shows differences between two files, or each corresponding file
 in two directories.  `cmp' shows the offsets and line numbers where
 two files differ.  `cmp' can also show all the characters that
 differ between the two files, side by side.  `diff3' shows differences
 among three files.  `sdiff' merges two files interactively.
 .
 The set of differences produced by `diff' can be used to distribute
 updates to text files (such as program source code) to other people.
 This method is especially useful when the differences are small compared
 to the complete files.  Given `diff' output, the `patch' program can
 update, or "patch", a copy of the file.
Homepage: http://www.gnu.org/software/diffutils/

Package: resolvconf
Status: install ok unpacked
Priority: optional
Section: net
Installed-Size: 191
Maintainer: resolvconf maintainers <resolvconf-devel@lists.alioth.debian.org>
Architecture: all
Version: 1.79
Depends: ifupdown, lsb-base (>= 4.1+Debian3), debconf (>= 0.5) | debconf-2.0, init-system-helpers (>= 1.18~)
Breaks: dhcp3-client (<< 4.1.1-P1-15+squeeze1), dnscache-run, sysv-rc (<< 2.88dsf-42)
Enhances: dhcpcd, dnsmasq, ifupdown, isc-dhcp-client, libc6, network-manager, nscd, pdnsd, ppp, pump, udhcpc
Conffiles:
 /etc/dhcp/dhclient-enter-hooks.d/resolvconf newconffile
 /etc/init.d/resolvconf newconffile
 /etc/init/resolvconf.conf newconffile
 /etc/network/if-down.d/resolvconf newconffile
 /etc/network/if-up.d/000resolvconf newconffile
 /etc/ppp/ip-down.d/000resolvconf newconffile
 /etc/ppp/ip-up.d/000resolvconf newconffile
 /etc/resolvconf/interface-order newconffile
 /etc/resolvconf/resolv.conf.d/base newconffile
 /etc/resolvconf/resolv.conf.d/head newconffile
 /etc/resolvconf/update.d/libc newconffile
Description: name server information handler
 Resolvconf is a framework for keeping up to date the system's
 information about name servers. It sets itself up as the intermediary
 between programs that supply this information (such as ifup and
 ifdown, DHCP clients, the PPP daemon and local name servers) and
 programs that use this information (such as DNS caches and resolver
 libraries).
 .
 This package may require some manual configuration. Please
 read the README file for detailed instructions.
Homepage: http://alioth.debian.org/projects/resolvconf/

Package: vim-runtime
Status: install ok installed
Priority: optional
Section: editors
Installed-Size: 27583
Maintainer: Debian Vim Maintainers <pkg-vim-maintainers@lists.alioth.debian.org>
Architecture: all
Multi-Arch: foreign
Source: vim
Version: 2:8.0.0197-4+deb9u3
Recommends: vim | vim-gtk | vim-gtk3 | vim-athena | vim-nox | vim-tiny
Breaks: vim-tiny (<< 2:8.0.0197-4+deb9u3)
Enhances: vim-tiny
Description: Vi IMproved - Runtime files
 Vim is an almost compatible version of the UNIX editor Vi.
 .
 This package contains vimtutor and the architecture independent runtime
 files, used, if available, by all vim variants available in Debian.
 Example of such runtime files are: online documentation, rules for
 language-specific syntax highlighting and indentation, color schemes,
 and standard plugins.
Homepage: http://www.vim.org/

Package: libpam-modules
Status: install ok installed
Priority: required
Section: admin
Installed-Size: 874
Maintainer: Steve Langasek <vorlon@debian.org>
Architecture: amd64
Multi-Arch: same
Source: pam
Version: 1.1.8-3.6
Replaces: libpam-umask, libpam0g-util
Provides: libpam-mkhomedir, libpam-motd, libpam-umask
Pre-Depends: libaudit1 (>= 1:2.2.1), libc6 (>= 2.15), libdb5.3, libpam0g (>= 1.1.3-2), libselinux1 (>= 2.1.9), debconf (>= 0.5) | debconf-2.0, libpam-modules-bin (= 1.1.8-3.6)
Conflicts: libpam-mkhomedir, libpam-motd, libpam-umask
Conffiles:
 /etc/security/access.conf 13ec4d189f0ed9acf3433977a53d446b
 /etc/security/group.conf f1e26e8db6f7abd2d697d7dad3422c36
 /etc/security/limits.conf 11c27ba00b7bd6a255f33126f75c5005
 /etc/security/namespace.conf 6424c99a62ddf4b7d3ca713bb06ded89
 /etc/security/namespace.init d9e6a7c85e966427ef23a04ec6c7000f
 /etc/security/pam_env.conf ddee4a931170dc21b4e0b9bb28e02a7b
 /etc/security/sepermit.conf d41c74654734a5c069a37bfc02f0a6d4
 /etc/security/time.conf 06e05c6079e839c8833ac7c3abfde192
Description: Pluggable Authentication Modules for PAM
 This package completes the set of modules for PAM. It includes the
  pam_unix.so module as well as some specialty modules.
Homepage: http://www.linux-pam.org/

Package: python3-urllib3
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 302
Maintainer: Debian Python Modules Team <python-modules-team@lists.alioth.debian.org>
Architecture: all
Source: python-urllib3
Version: 1.19.1-1
Depends: python3:any (>= 3.3.2-2~), python3-six
Recommends: ca-certificates
Suggests: python3-cryptography, python3-idna, python3-openssl, python3-socks
Description: HTTP library with thread-safe connection pooling for Python3
 urllib3 supports features left out of urllib and urllib2 libraries.
 .
   - Re-use the same socket connection for multiple requests (HTTPConnectionPool
     and HTTPSConnectionPool) (with optional client-side certificate
     verification).
   - File posting (encode_multipart_formdata).
   - Built-in redirection and retries (optional).
   - Supports gzip and deflate decoding.
   - Thread-safe and sanity-safe.
   - Small and easy to understand codebase perfect for extending and
     building upon.
 .
 This package contains the Python 3 version of the library.
Homepage: http://urllib3.readthedocs.org

Package: libstdc++6
Status: install ok installed
Priority: important
Section: libs
Installed-Size: 1998
Maintainer: Debian GCC Maintainers <debian-gcc@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: gcc-6
Version: 6.3.0-18+deb9u1
Replaces: libstdc++6-6-dbg (<< 4.9.0-3)
Depends: gcc-6-base (= 6.3.0-18+deb9u1), libc6 (>= 2.18), libgcc1 (>= 1:4.2)
Breaks: blockattack (<= 1.4.1+ds1-2.1+b2), boo (<= 0.9.5~git20110729.r1.202a430-2), c++-annotations (<= 10.2.0-1), clustalx (<= 2.1+lgpl-3), dff (<= 1.3.0+dfsg.1-4.1+b3), digikam-private-libs (<= 4:4.4.0-1.1+b2), emscripten (<= 1.22.1-1), ergo (<= 3.4.0-1), fceux (<= 2.2.2+dfsg0-1), fiona (<= 1.5.1-2), flush (<= 0.9.12-3.1), freeorion (<= 0.4.4+git20150327-2), fslview (<= 4.0.1-4), fwbuilder (<= 5.1.0-4), gcc-4.3 (<< 4.3.6-1), gcc-4.4 (<< 4.4.6-4), gcc-4.5 (<< 4.5.3-2), gnote (<= 3.16.2-1), gnudatalanguage (<= 0.9.5-2+b2), innoextract (<= 1.4-1+b1), libantlr-dev (<= 2.7.7+dfsg-6), libapache2-mod-passenger (<= 5.0.7-1), libaqsis1 (<= 1.8.2-1), libassimp3 (<= 3.0~dfsg-4), libboost-date-time1.54.0, libboost-date-time1.55.0, libchemps2-1 (<= 1.5-1), libcpprest2.4 (<= 2.4.0-2), libdap17 (<= 3.14.0-2), libdapclient6 (<= 3.14.0-2), libdapserver7 (<= 3.14.0-2), libdavix0 (<= 0.4.0-1+b1), libdballe6 (<= 6.8-1), libdiet-admin2.8 (<= 2.8.0-1+b3), libdiet-client2.8 (<= 2.8.0-1+b3), libdiet-sed2.8 (<= 2.8.0-1+b3), libfreefem++ (<= 3.37.1-1), libgazebo5 (<= 5.0.1+dfsg-2.1), libgetfem4++ (<= 4.2.1~beta1~svn4635~dfsg-3+b1), libgmsh2 (<= 2.9.3+dfsg1-1), libinsighttoolkit4.7 (<= 4.7.2-2), libkolabxml1 (<= 1.1.0-3), libmarisa0 (<= 0.2.4-8), libogre-1.8.0 (<= 1.8.0+dfsg1-7+b1), libogre-1.9.0 (<= 1.9.0+dfsg1-4), libopencv-core2.4, libopenmpi1.6, libopenwalnut1 (<= 1.4.0~rc1+hg3a3147463ee2-1+b1), libpqxx-4.0 (<= 4.0.1+dfsg-3), libreoffice-core (<= 1:4.4.5-2), librime1 (<= 1.2+dfsg-2), libsigc++-2.0-0c2a (<= 2.4.1-1+b1), libwibble-dev (<= 1.1-1), libwreport2 (<= 2.14-1), libxmltooling6 (<= 1.5.3-2.1), lightspark (<= 0.7.2+git20150512-2+b1), mira-assembler (<= 4.9.5-1), mongodb (<= 1:2.4.14-2), mongodb-server (<= 1:2.4.14-2), ncbi-blast+ (<= 2.2.30-4), openscad (<= 2014.03+dfsg-1+b1), passepartout (<= 0.7.1-1.1), pdf2djvu (<= 0.7.21-2), photoprint (<= 0.4.2~pre2-2.3+b2), plastimatch (<= 1.6.2+dfsg-1), plee-the-bear (<= 0.6.0-3.1), povray (<= 1:3.7.0.0-8), powertop (<= 2.6.1-1), printer-driver-brlaser (<= 3-3), psi4 (<= 4.0~beta5+dfsg-2+b1), python-fiona (<= 1.5.1-2), python-guiqwt (<= 2.3.1-1), python-healpy (<= 1.8.1-1+b1), python-htseq (<= 0.5.4p3-2), python-imposm (<= 2.5.0-3+b2), python-pysph (<= 0~20150606.gitfa26de9-5), python-rasterio (<= 0.24.0-1), python-scipy (<= 0.14.1-1), python-sfml (<= 2.2~git20150611.196c88+dfsg-1+b1), python3-fiona (<= 1.5.1-2), python3-scipy (<= 0.14.1-1), python3-sfml (<= 2.2~git20150611.196c88+dfsg-1+b1), python3-taglib (<= 0.3.6+dfsg-2+b2), realtimebattle (<= 1.0.8-14), ruby-passenger (<= 5.0.7-1), schroot (<= 1.6.10-1+b1), sqlitebrowser (<= 3.5.1-3), tecnoballz (<= 0.93.1-6), wesnoth-1.12-core (<= 1:1.12.4-1), widelands (<= 1:18-3+b1), xflr5 (<= 6.09.06-2)
Conflicts: scim (<< 1.4.2-1)
Description: GNU Standard C++ Library v3
 This package contains an additional runtime library for C++ programs
 built with the GNU compiler.
 .
 libstdc++-v3 is a complete rewrite from the previous libstdc++-v2, which
 was included up to g++-2.95. The first version of libstdc++-v3 appeared
 in g++-3.0.
Homepage: http://gcc.gnu.org/

Package: libkrb5-3
Status: install ok installed
Priority: standard
Section: libs
Installed-Size: 1026
Maintainer: Sam Hartman <hartmans@debian.org>
Architecture: amd64
Multi-Arch: same
Source: krb5
Version: 1.15-1+deb9u2
Depends: libc6 (>= 2.16), libcomerr2 (>= 1.34), libk5crypto3 (>= 1.15~beta1), libkeyutils1 (>= 1.5.9), libkrb5support0 (= 1.15-1+deb9u2)
Recommends: krb5-locales
Suggests: krb5-doc, krb5-user
Breaks: libsmbclient (<= 2:3.6.1-2), sssd (<= 1.2.1-4.3)
Description: MIT Kerberos runtime libraries
 Kerberos is a system for authenticating users and services on a network.
 Kerberos is a trusted third-party service.  That means that there is a
 third party (the Kerberos server) that is trusted by all the entities on
 the network (users and services, usually called "principals").
 .
 This is the MIT reference implementation of Kerberos V5.
 .
 This package contains the runtime library for the main Kerberos v5 API
 used by applications and Kerberos clients.
Homepage: http://web.mit.edu/kerberos/

Package: libffi6
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 56
Maintainer: Debian GCC Maintainers <debian-gcc@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: libffi
Version: 3.2.1-6
Depends: libc6 (>= 2.14)
Description: Foreign Function Interface library runtime
 A foreign function interface is the popular name for the interface that
 allows code written in one language to call code written in another
 language.

Package: libaudit-common
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 30
Maintainer: Laurent Bigonville <bigon@debian.org>
Architecture: all
Multi-Arch: foreign
Source: audit
Version: 1:2.6.7-2
Replaces: libaudit0, libaudit1 (<< 1:2.2.1-2)
Breaks: libaudit0, libaudit1 (<< 1:2.2.1-2)
Conffiles:
 /etc/libaudit.conf cdc703f9d27f0d980271a9e95d0f18b2
Description: Dynamic library for security auditing - common files
 The audit-libs package contains the dynamic libraries needed for
 applications to use the audit framework. It is used to monitor systems for
 security related events.
 .
 This package contains the libaudit.conf configuration file and the associated
 manpage.
Homepage: https://people.redhat.com/sgrubb/audit/

Package: libcomerr2
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 84
Maintainer: Theodore Y. Ts'o <tytso@mit.edu>
Architecture: amd64
Multi-Arch: same
Source: e2fsprogs
Version: 1.43.4-2+deb9u2
Replaces: e2fsprogs (<< 1.34-1)
Provides: libcomerr-kth-compat
Depends: libc6 (>= 2.17)
Description: common error description library
 libcomerr is an attempt to present a common error-handling mechanism to
 manipulate the most common form of error code in a fashion that does not
 have the problems identified with mechanisms commonly in use.
Homepage: http://e2fsprogs.sourceforge.net

Package: findutils
Essential: yes
Status: install ok installed
Priority: required
Section: utils
Installed-Size: 1854
Maintainer: Andreas Metzler <ametzler@debian.org>
Architecture: amd64
Multi-Arch: foreign
Version: 4.6.0+git+20161106-2
Pre-Depends: libc6 (>= 2.17), libselinux1 (>= 1.32)
Suggests: mlocate | locate
Breaks: binstats (<< 1.08-8.1), debhelper (<< 9.20130504), guilt (<< 0.36-0.2), kernel-package (<< 13.000), libpython3.4-minimal (<< 3.4.4-2), libpython3.5-minimal (<< 3.5.1-3), lsat (<< 0.9.7.1-2.1), mc (<< 3:4.8.11-1), sendmail (<< 8.14.4-5), switchconf (<< 0.0.9-2.1)
Conflicts: debconf (<< 1.5.50)
Description: utilities for finding files--find, xargs
 GNU findutils provides utilities to find files meeting specified
 criteria and perform various actions on the files which are found.
 This package contains 'find' and 'xargs'; however, 'locate' has
 been split off into a separate package.
Homepage: http://savannah.gnu.org/projects/findutils/

Package: libpam0g
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 229
Maintainer: Steve Langasek <vorlon@debian.org>
Architecture: amd64
Multi-Arch: same
Source: pam
Version: 1.1.8-3.6
Replaces: libpam0g-util
Depends: libaudit1 (>= 1:2.2.1), libc6 (>= 2.14), debconf (>= 0.5) | debconf-2.0
Suggests: libpam-doc
Description: Pluggable Authentication Modules library
 Contains the shared library for Linux-PAM, a library that enables the
 local system administrator to choose how applications authenticate users.
 In other words, without rewriting or recompiling a PAM-aware application,
 it is possible to switch between the authentication mechanism(s) it uses.
 One may entirely upgrade the local authentication system without touching
 the applications themselves.
Homepage: http://www.linux-pam.org/

Package: libxdmcp6
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 53
Maintainer: Debian X Strike Force <debian-x@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: libxdmcp
Version: 1:1.1.2-3
Depends: libbsd0 (>= 0.2.0), libc6 (>= 2.4)
Description: X11 Display Manager Control Protocol library
 This package provides the main interface to the X11 display manager control
 protocol library, which allows for remote logins to display managers.
 .
 More information about X.Org can be found at:
 <URL:http://www.X.org>
 .
 This module can be found at
 git://anongit.freedesktop.org/git/xorg/lib/libXdmcp

Package: libcap-ng0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 43
Maintainer: Pierre Chifflier <pollux@debian.org>
Architecture: amd64
Multi-Arch: same
Source: libcap-ng (0.7.7-3)
Version: 0.7.7-3+b1
Depends: libc6 (>= 2.8)
Description: An alternate POSIX capabilities library
 This library implements the user-space interfaces to the POSIX
 1003.1e capabilities available in Linux kernels.  These capabilities are
 a partitioning of the all powerful root privilege into a set of distinct
 privileges.
 .
 The libcap-ng library is intended to make programming with POSIX
 capabilities much easier than the traditional libcap library.
 .
 This package contains header files and libraries for libcap-ng.
Homepage: http://people.redhat.com/sgrubb/libcap-ng

Package: dbus
Status: install ok installed
Priority: standard
Section: admin
Installed-Size: 534
Maintainer: Utopia Maintenance Team <pkg-utopia-maintainers@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: foreign
Version: 1.10.32-0+deb9u1
Depends: adduser, init-system-helpers (>= 1.3~), lsb-base (>= 3.2-14), libapparmor1 (>= 2.8.95), libaudit1 (>= 1:2.2.1), libc6 (>= 2.14), libcap-ng0, libdbus-1-3 (= 1.10.32-0+deb9u1), libexpat1 (>= 2.1~beta3), libselinux1 (>= 2.0.65), libsystemd0 (>= 209)
Suggests: default-dbus-session-bus | dbus-session-bus
Conffiles:
 /etc/default/dbus 0d0f25a2f993509c857eb262f6e22015
 /etc/init.d/dbus ec9a7d183ec50837a12aca3f9c95cc27
Description: simple interprocess messaging system (daemon and utilities)
 D-Bus is a message bus, used for sending messages between applications.
 Conceptually, it fits somewhere in between raw sockets and CORBA in
 terms of complexity.
 .
 D-Bus supports broadcast messages, asynchronous messages (thus
 decreasing latency), authentication, and more. It is designed to be
 low-overhead; messages are sent using a binary protocol, not using
 XML. D-Bus also supports a method call mapping for its messages, but
 it is not required; this makes using the system quite simple.
 .
 It comes with several bindings, including GLib, Python, Qt and Java.
 .
 This package contains the D-Bus daemon and related utilities.
 .
 The client-side library can be found in the libdbus-1-3 package, as it is no
 longer contained in this package.
Homepage: http://dbus.freedesktop.org/

Package: libmount1
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 403
Maintainer: Debian util-linux Maintainers <ah-util-linux@debian.org>
Architecture: amd64
Multi-Arch: same
Source: util-linux
Version: 2.29.2-1+deb9u1
Depends: libblkid1 (>= 2.17.2), libc6 (>= 2.17), libselinux1 (>= 2.6-3~)
Description: device mounting library
 This device mounting library is used by mount and umount helpers.

Package: python3-configobj
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 161
Maintainer: Debian Python Modules Team <python-modules-team@lists.alioth.debian.org>
Architecture: all
Source: configobj
Version: 5.0.6-2
Depends: python3-six, python3:any (>= 3.3.2-2~)
Suggests: python-configobj-doc
Description: simple but powerful config file reader and writer for Python 3
 ConfigObj is a simple but powerful config file reader and writer: an
 ini file round tripper. Its main feature is that it is very easy to
 use, with a straightforward programmer's interface and a simple
 syntax for config files. It has lots of other features, though:
 .
  * Nested sections (subsections), to any level
  * List values
  * Multiple line values
  * String interpolation (substitution)
  * Integrated with a powerful validation system
    + including automatic type checking/conversion
    + and allowing default values
    + repeated sections
  * All comments in the file are preserved
  * The order of keys/sections is preserved
  * Full Unicode support
  * Powerful unrepr mode for storing/retrieving Python data-types
 .
  This is the Python 3 version of the package.
Homepage: http://www.voidspace.org.uk/python/configobj.html

Package: libkeyutils1
Status: install ok installed
Priority: standard
Section: libs
Installed-Size: 36
Maintainer: Christian Kastner <ckk@debian.org>
Architecture: amd64
Multi-Arch: same
Source: keyutils
Version: 1.5.9-9
Depends: libc6 (>= 2.14)
Description: Linux Key Management Utilities (library)
 Keyutils is a set of utilities for managing the key retention facility in the
 kernel, which can be used by filesystems, block devices and more to gain and
 retain the authorization and encryption keys required to perform secure
 operations.
 .
 This package provides a wrapper library for the key management facility system
 calls.
Homepage: http://people.redhat.com/~dhowells/keyutils/

Package: python3-setuptools
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 922
Maintainer: Matthias Klose <doko@debian.org>
Architecture: all
Multi-Arch: foreign
Source: python-setuptools
Version: 33.1.1-1
Depends: python3-pkg-resources (= 33.1.1-1), python3:any (>= 3.3.2-2~)
Suggests: python-setuptools-doc
Description: Python3 Distutils Enhancements
 Extensions to the python-distutils for large or complex distributions.
Homepage: https://pypi.python.org/pypi/setuptools

Package: login
Essential: yes
Status: install ok installed
Priority: required
Section: admin
Installed-Size: 2747
Maintainer: Shadow package maintainers <pkg-shadow-devel@lists.alioth.debian.org>
Architecture: amd64
Source: shadow
Version: 1:4.4-4.1
Replaces: manpages-de (<< 0.5-3), manpages-tr (<< 1.0.5), manpages-zh (<< 1.5.1-1)
Pre-Depends: libaudit1 (>= 1:2.2.1), libc6 (>= 2.14), libpam0g (>= 0.99.7.1), libpam-runtime, libpam-modules (>= 1.1.8-1)
Conflicts: amavisd-new (<< 2.3.3-8), backupninja (<< 0.9.3-5), echolot (<< 2.1.8-4), gnunet (<< 0.7.0c-2), python-4suite (<< 0.99cvs20060405-1)
Conffiles:
 /etc/login.defs c92ea31d5ac50ae3e5d33d24f1e70983
 /etc/pam.d/login 1fd6cb4d4267a68148ee9973510a9d3e
 /etc/pam.d/su ce6dcfda3b190a27a455bb38a45ff34a
 /etc/securetty a7fc5292d9ae16f24d45f94fe88e001b
Description: system login tools
 These tools are required to be able to login and use your system. The
 login program invokes your user shell and enables command execution. The
 newgrp program is used to change your effective group ID (useful for
 workgroup type situations). The su program allows changing your effective
 user ID (useful being able to execute commands as another user).
Homepage: https://github.com/shadow-maint/shadow

Package: net-tools
Status: install ok installed
Priority: important
Section: net
Installed-Size: 940
Maintainer: net-tools Team <pkg-net-tools-maintainers@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: foreign
Version: 1.60+git20161116.90da8a0-1
Replaces: ja-trans (<= 0.8-2), netbase (<< 4.00)
Depends: libc6 (>= 2.14), libselinux1 (>= 1.32)
Conflicts: ja-trans (<= 0.8-2)
Description: NET-3 networking toolkit
 This package includes the important tools for controlling the network
 subsystem of the Linux kernel.  This includes arp, ifconfig, netstat,
 rarp, nameif and route.  Additionally, this package contains utilities
 relating to particular network hardware types (plipconfig, slattach,
 mii-tool) and advanced aspects of IP configuration (iptunnel, ipmaddr).
 .
 In the upstream package 'hostname' and friends are included. Those are
 not installed by this package, since there is a special "hostname*.deb".
Homepage: http://sourceforge.net/projects/net-tools/

Package: adduser
Status: install ok installed
Priority: important
Section: admin
Installed-Size: 849
Maintainer: Debian Adduser Developers <adduser-devel@lists.alioth.debian.org>
Architecture: all
Multi-Arch: foreign
Version: 3.115
Depends: passwd, debconf (>= 0.5) | debconf-2.0
Suggests: liblocale-gettext-perl, perl
Conffiles:
 /etc/deluser.conf 773fb95e98a27947de4a95abb3d3f2a2
Description: add and remove users and groups
 This package includes the 'adduser' and 'deluser' commands for creating
 and removing users.
 .
  - 'adduser' creates new users and groups and adds existing users to
    existing groups;
  - 'deluser' removes users and groups and removes users from a given
    group.
 .
 Adding users with 'adduser' is much easier than adding them manually.
 Adduser will choose appropriate UID and GID values, create a home
 directory, copy skeletal user configuration, and automate setting
 initial values for the user's password, real name and so on.
 .
 Deluser can back up and remove users' home directories
 and mail spool or all the files they own on the system.
 .
 A custom script can be executed after each of the commands.
 .
  Development mailing list:
    http://lists.alioth.debian.org/mailman/listinfo/adduser-devel/
Homepage: http://alioth.debian.org/projects/adduser/

Package: ca-certificates
Status: install ok installed
Priority: optional
Section: misc
Installed-Size: 401
Maintainer: Michael Shuler <michael@pbandjelly.org>
Architecture: all
Multi-Arch: foreign
Version: 20200601~deb9u2
Depends: openssl (>= 1.0.0), debconf (>= 0.5) | debconf-2.0
Breaks: ca-certificates-java (<< 20121112+nmu1)
Enhances: openssl
Description: Common CA certificates
 Contains the certificate authorities shipped with Mozilla's browser to allow
 SSL-based applications to check for the authenticity of SSL connections.
 .
 Please note that Debian can neither confirm nor deny whether the
 certificate authorities whose certificates are included in this package
 have in any way been audited for trustworthiness or RFC 3647 compliance.
 Full responsibility to assess them belongs to the local system
 administrator.

Package: libacl1
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 62
Maintainer: Anibal Monsalve Salazar <anibal@debian.org>
Architecture: amd64
Multi-Arch: same
Source: acl (2.2.52-3)
Version: 2.2.52-3+b1
Depends: libattr1 (>= 1:2.4.46-8), libc6 (>= 2.14)
Conflicts: acl (<< 2.0.0), libacl1-kerberos4kth
Description: Access control list shared library
 This package contains the libacl.so dynamic library containing
 the POSIX 1003.1e draft standard 17 functions for manipulating
 access control lists.
Homepage: http://savannah.nongnu.org/projects/acl/

Package: openssh-client
Status: install ok installed
Priority: standard
Section: net
Installed-Size: 4111
Maintainer: Debian OpenSSH Maintainers <debian-ssh@lists.debian.org>
Architecture: amd64
Multi-Arch: foreign
Source: openssh
Version: 1:7.4p1-10+deb9u7
Replaces: ssh, ssh-krb5
Provides: rsh-client, ssh-client
Depends: adduser (>= 3.10), dpkg (>= 1.7.0), passwd, libc6 (>= 2.17), libedit2 (>= 2.11-20080614), libgssapi-krb5-2 (>= 1.14+dfsg), libselinux1 (>= 1.32), libssl1.0.2 (>= 1.0.2d), zlib1g (>= 1:1.1.4)
Recommends: xauth
Suggests: keychain, libpam-ssh, monkeysphere, ssh-askpass
Conflicts: sftp
Conffiles:
 /etc/ssh/moduli fe5be9e1b2ad5c55132a3521ecaadcdd
 /etc/ssh/ssh_config d26206bb4490f72d051d2642c3bf03ee
Description: secure shell (SSH) client, for secure access to remote machines
 This is the portable version of OpenSSH, a free implementation of
 the Secure Shell protocol as specified by the IETF secsh working
 group.
 .
 Ssh (Secure Shell) is a program for logging into a remote machine
 and for executing commands on a remote machine.
 It provides secure encrypted communications between two untrusted
 hosts over an insecure network. X11 connections and arbitrary TCP/IP
 ports can also be forwarded over the secure channel.
 It can be used to provide applications with a secure communication
 channel.
 .
 This package provides the ssh, scp and sftp clients, the ssh-agent
 and ssh-add programs to make public key authentication more convenient,
 and the ssh-keygen, ssh-keyscan, ssh-copy-id and ssh-argv0 utilities.
 .
 In some countries it may be illegal to use any encryption at all
 without a special permit.
 .
 ssh replaces the insecure rsh, rcp and rlogin programs, which are
 obsolete for most purposes.
Homepage: http://www.openssh.com/

Package: ncurses-bin
Essential: yes
Status: install ok installed
Priority: required
Section: utils
Installed-Size: 536
Maintainer: Craig Small <csmall@debian.org>
Architecture: amd64
Multi-Arch: foreign
Source: ncurses
Version: 6.0+20161126-1+deb9u2
Pre-Depends: libc6 (>= 2.14), libtinfo5 (>= 6.0+20151017), libtinfo5 (<< 6.1~)
Description: terminal-related programs and man pages
 The ncurses library routines are a terminal-independent method of
 updating character screens with reasonable optimization.
 .
 This package contains the programs used for manipulating the terminfo
 database and individual terminfo entries, as well as some programs for
 resetting terminals and such.
Homepage: http://invisible-island.net/ncurses/

Package: dh-python
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 402
Maintainer: Piotr Ożarowski <piotr@debian.org>
Architecture: all
Multi-Arch: foreign
Version: 2.20170125
Replaces: python3 (<< 3.3.2-4~)
Depends: python3:any (>= 3.3.2-2~)
Suggests: libdpkg-perl
Breaks: python3 (<< 3.3.2-4~)
Description: Debian helper tools for packaging Python libraries and applications
 This package contains:
  * pybuild - invokes various build systems for requested Python versions in
    order to build modules and extensions
  * dh_python2 - calculates Python 2.X dependencies for Debian packages,
    adds maintainer scripts to byte compile files, etc.
  * dh_python3 - calculates Python 3.X dependencies for Debian packages,
    adds maintainer scripts to byte compile files, etc.
  * dh_pypy - calculates PyPy dependencies for Debian packages,
    adds maintainer scripts to byte compile files, etc.

Package: libmnl0
Status: install ok installed
Priority: important
Section: libs
Installed-Size: 46
Maintainer: Anibal Monsalve Salazar <anibal@debian.org>
Architecture: amd64
Multi-Arch: same
Source: libmnl
Version: 1.0.4-2
Depends: libc6 (>= 2.14)
Description: minimalistic Netlink communication library
 libmnl is a minimalistic user-space library oriented to Netlink developers.
 There are a lot of common tasks in parsing, validating, constructing of
 both the Netlink header and TLVs that are repetitive and easy to get wrong.
 This library aims to provide simple helpers that allows you to re-use code
 and to avoid re-inventing the wheel.
 .
 The main features of this library are:
 .
 Small: the shared library requires around 30KB for an x86-based computer.
 .
 Simple: this library avoids complexity and elaborated abstractions that
 tend to hide Netlink details.
 .
 Easy to use: the library simplifies the work for Netlink-wise developers.
 It provides functions to make socket handling, message building,
 validating, parsing and sequence tracking, easier.
 .
 Easy to re-use: you can use the library to build your own abstraction
 layer on top of this library.
 .
 Decoupling: the interdependency of the main bricks that compose the
 library is reduced, i.e. the library provides many helpers, but the
 programmer is not forced to use them.
 .
 This package contains the shared libraries needed to run programs that use
 the minimalistic Netlink communication library.
Homepage: http://netfilter.org/projects/libmnl/

Package: libxcb1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 283
Maintainer: Debian X Strike Force <debian-x@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: libxcb
Version: 1.12-1
Depends: libc6 (>= 2.14), libxau6, libxdmcp6
Breaks: alsa-utils (<< 1.0.24.2-5)
Description: X C Binding
 This package contains the library files needed to run software using libxcb,
 the X C Binding.
 .
 The XCB library provides an interface to the X Window System protocol,
 designed to replace the Xlib interface.  XCB provides several advantages over
 Xlib:
 .
  * Size: small library and lower memory footprint
  * Latency hiding: batch several requests and wait for the replies later
  * Direct protocol access: one-to-one mapping between interface and protocol
  * Thread support: access XCB from multiple threads, with no explicit locking
  * Easy creation of new extensions: automatically generates interface from
    machine-parsable protocol descriptions
Homepage: http://xcb.freedesktop.org

Package: locales
Status: install ok installed
Priority: standard
Section: localization
Installed-Size: 9246
Maintainer: GNU Libc Maintainers <debian-glibc@lists.debian.org>
Architecture: all
Source: glibc
Version: 2.24-11+deb9u4
Replaces: manpages-fr-extra (<< 20141022)
Depends: libc-bin (>> 2.24), libc-l10n (>> 2.24), debconf (>= 0.5) | debconf-2.0
Conffiles:
 /etc/locale.alias 53e10994fabc5169907e413b792785dd
Description: GNU C Library: National Language (locale) data [support]
 Machine-readable data files, shared objects and programs used by the
 C library for localization (l10n) and internationalization (i18n) support.
 .
 This package contains tools to generate locale definitions from source
 files (included in this package). It allows you to customize which
 definitions actually get generated. This is a space-saver over how this
 package used to be, with all locales generated by default. This created
 a package that unpacked to an excess of 30 megs.
Homepage: http://www.gnu.org/software/libc/libc.html

Package: libsepol1
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 653
Maintainer: Debian SELinux maintainers <selinux-devel@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: same
Source: libsepol
Version: 2.6-2
Depends: libc6 (>= 2.14)
Description: SELinux library for manipulating binary security policies
 Security-enhanced Linux is a patch of the Linux kernel and a number
 of utilities with enhanced security functionality designed to add
 mandatory access controls to Linux.  The Security-enhanced Linux
 kernel contains new architectural components originally developed to
 improve the security of the Flask operating system. These
 architectural components provide general support for the enforcement
 of many kinds of mandatory access control policies, including those
 based on the concepts of Type Enforcement®, Role-based Access
 Control, and Multi-level Security.
 .
 libsepol provides an API for the manipulation of SELinux binary policies.
 It is used by checkpolicy (the policy compiler) and similar tools, as well
 as by programs like load_policy that need to perform specific transformations
 on binary policies such as customizing policy boolean settings.
Homepage: http://userspace.selinuxproject.org/

Package: libx11-data
Status: install ok installed
Priority: optional
Section: x11
Installed-Size: 1666
Maintainer: Debian X Strike Force <debian-x@lists.debian.org>
Architecture: all
Multi-Arch: foreign
Source: libx11
Version: 2:1.6.4-3+deb9u3
Breaks: libx11-6 (<< 2:1.4.1)
Description: X11 client-side library
 This package provides the locale data files for libx11.
 .
 More information about X.Org can be found at:
 <URL:https://www.X.org>
 .
 This module can be found at
 git://anongit.freedesktop.org/git/xorg/lib/libX11

Package: libxau6
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 61
Maintainer: Debian X Strike Force <debian-x@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: libxau
Version: 1:1.0.8-1
Depends: libc6 (>= 2.4)
Pre-Depends: multiarch-support
Description: X11 authorisation library
 This package provides the main interface to the X11 authorisation handling,
 which controls authorisation for X connections, both client-side and
 server-side.
 .
 More information about X.Org can be found at:
 <URL:http://www.X.org>
 .
 This module can be found at
 git://anongit.freedesktop.org/git/xorg/lib/libXau

Package: python3-jwt
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 69
Maintainer: Debian Python Modules Team <python-modules-team@lists.alioth.debian.org>
Architecture: all
Source: pyjwt
Version: 1.4.2-1+deb9u1
Depends: python3:any (>= 3.3.2-2~)
Recommends: python3-cryptography
Suggests: python3-crypto
Description: Python 3 implementation of JSON Web Token
 PyJWT implements the JSON Web Token draft 01, a way of representing
 signed content using JSON data structures.
 .
 Supported algorithms for cryptographic signing:
 .
   * HS256 - HMAC using SHA-256 hash algorithm (default)
   * HS384 - HMAC using SHA-384 hash algorithm
   * HS512 - HMAC using SHA-512 hash algorithm
   * RS256 - RSASSA-PKCS1-v1_5 signature algorithm using SHA-256 hash
     algorithm
   * RS384 - RSASSA-PKCS1-v1_5 signature algorithm using SHA-384 hash
     algorithm
   * RS512 - RSASSA-PKCS1-v1_5 signature algorithm using SHA-512 hash
     algorithm
 .
 Supported reserved claim names:
   - "exp" (Expiration Time) Claim
 .
 This package contains the Python 3 version of the library.
Homepage: https://github.com/jpadilla/pyjwt

Package: libidn11
Status: install ok installed
Priority: standard
Section: libs
Installed-Size: 307
Maintainer: Debian Libidn Team <help-libidn@gnu.org>
Architecture: amd64
Multi-Arch: same
Source: libidn
Version: 1.33-1+deb9u1
Replaces: libidn11-dev
Depends: libc6 (>= 2.14)
Conflicts: libidn9-dev
Description: GNU Libidn library, implementation of IETF IDN specifications
 GNU Libidn is a fully documented implementation of the Stringprep,
 Punycode and IDNA specifications.  Libidn's purpose is to encode and
 decode internationalized domain names.  The Nameprep, XMPP, SASLprep,
 and iSCSI profiles are supported.
 .
 This package contains the shared library.
Homepage: https://www.gnu.org/software/libidn/

Package: libmpdec2
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 254
Maintainer: Matthias Klose <doko@debian.org>
Architecture: amd64
Multi-Arch: same
Source: mpdecimal
Version: 2.4.2-1
Replaces: libmpdec2.3
Depends: libc6 (>= 2.14)
Breaks: libmpdec2.3
Description: library for decimal floating point arithmetic (runtime library)
 mpdecimal is a package for correctly-rounded arbitrary precision decimal
 floating point arithmetic.
Homepage: http://www.bytereef.org/mpdecimal/index.html

Package: libdbus-1-3
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 450
Maintainer: Utopia Maintenance Team <pkg-utopia-maintainers@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: same
Source: dbus
Version: 1.10.32-0+deb9u1
Depends: libc6 (>= 2.17), libsystemd0 (>= 209)
Recommends: dbus
Breaks: dbus (<< 1.9.16-1~)
Description: simple interprocess messaging system (library)
 D-Bus is a message bus, used for sending messages between applications.
 Conceptually, it fits somewhere in between raw sockets and CORBA in
 terms of complexity.
 .
 D-Bus supports broadcast messages, asynchronous messages (thus
 decreasing latency), authentication, and more. It is designed to be
 low-overhead; messages are sent using a binary protocol, not using
 XML. D-Bus also supports a method call mapping for its messages, but
 it is not required; this makes using the system quite simple.
 .
 It comes with several bindings, including GLib, Python, Qt and Java.
 .
 The daemon can be found in the dbus package.
Homepage: http://dbus.freedesktop.org/

Package: libgcc1
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 108
Maintainer: Debian GCC Maintainers <debian-gcc@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: gcc-6 (6.3.0-18+deb9u1)
Version: 1:6.3.0-18+deb9u1
Depends: gcc-6-base (= 6.3.0-18+deb9u1), libc6 (>= 2.14)
Breaks: gcc-4.3 (<< 4.3.6-1), gcc-4.4 (<< 4.4.6-4), gcc-4.5 (<< 4.5.3-2)
Description: GCC support library
 Shared version of the support library, a library of internal subroutines
 that GCC uses to overcome shortcomings of particular machines, or
 special needs for some languages.
Homepage: http://gcc.gnu.org/

Package: util-linux
Essential: yes
Status: install ok installed
Priority: required
Section: utils
Installed-Size: 3558
Maintainer: Debian util-linux Maintainers <ah-util-linux@debian.org>
Architecture: amd64
Multi-Arch: foreign
Version: 2.29.2-1+deb9u1
Replaces: bash-completion (<< 1:2.1-4.1~), initscripts (<< 2.88dsf-59.2~), mount (= 2.26.2-3), mount (= 2.26.2-3ubuntu1), sysvinit-utils (<< 2.88dsf-59.1~)
Pre-Depends: libblkid1 (>= 2.25), libc6 (>= 2.15), libfdisk1 (>= 2.29~rc2), libmount1 (>= 2.25), libncursesw5 (>= 6), libpam0g (>= 0.99.7.1), libselinux1 (>= 2.6-3~), libsmartcols1 (>= 2.28~rc1), libsystemd0, libtinfo5 (>= 6), libudev1 (>= 183), libuuid1 (>= 2.16), zlib1g (>= 1:1.1.4)
Suggests: dosfstools, kbd | console-tools, util-linux-locales
Breaks: bash-completion (<< 1:2.1-4.1~), cloud-utils (<< 0.27-1~), grml-debootstrap (<< 0.68), mount (= 2.26.2-3), mount (= 2.26.2-3ubuntu1), sysvinit-utils (<< 2.88dsf-59.4~)
Conffiles:
 /etc/default/hwclock 3916544450533eca69131f894db0ca12
 /etc/init.d/hwclock.sh 1ca5c0743fa797ffa364db95bb8d8d8e
 /etc/pam.d/runuser b8b44b045259525e0fae9e38fdb2aeeb
 /etc/pam.d/runuser-l 2106ea05877e8913f34b2c77fa02be45
Description: miscellaneous system utilities
 This package contains a number of important utilities, most of which
 are oriented towards maintenance of your system. Some of the more
 important utilities included in this package allow you to partition
 your hard disk, view kernel messages, and create new filesystems.

Package: libustr-1.0-1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 258
Maintainer: Vaclav Ovsik <vaclav.ovsik@i.cz>
Architecture: amd64
Multi-Arch: same
Source: ustr
Version: 1.0.4-6
Depends: libc6 (>= 2.14)
Description: Micro string library: shared library
 ustr (Micro string library) is a string API for C. It has tiny overhead over
 just plain strdup(), is much safer, is easier to use, is faster for many
 operations, can be used with read-only or automatically allocated data. You
 don't even need to link to the library to use it (so there are no
 dependencies).
 .
 This package contains the shared library.
Homepage: http://www.and.org/ustr/

Package: libwrap0
Status: install ok installed
Priority: standard
Section: libs
Installed-Size: 104
Maintainer: Marco d'Itri <md@linux.it>
Architecture: amd64
Multi-Arch: same
Source: tcp-wrappers
Version: 7.6.q-26
Replaces: tcpd (<< 7.6.q-20)
Depends: libc6 (>= 2.14)
Recommends: tcpd
Breaks: tcpd (<< 7.6.q-20)
Description: Wietse Venema's TCP wrappers library
 Wietse Venema's network logger, also known as TCPD or LOG_TCP.
 .
 These programs log the client host name of incoming telnet,
 ftp, rsh, rlogin, finger etc. requests.
 .
 Security options are:
  - access control per host, domain and/or service;
  - detection of host name spoofing or host address spoofing;
  - booby traps to implement an early-warning system.

Package: libpython3.5-minimal
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 3749
Maintainer: Matthias Klose <doko@debian.org>
Architecture: amd64
Multi-Arch: same
Source: python3.5
Version: 3.5.3-1+deb9u3
Depends: libc6 (>= 2.14), libssl1.1 (>= 1.1.0)
Recommends: libpython3.5-stdlib
Conflicts: binfmt-support (<< 1.1.2)
Conffiles:
 /etc/python3.5/sitecustomize.py d6b276695157bde06a56ba1b2bc53670
Description: Minimal subset of the Python language (version 3.5)
 This package contains some essential modules. It is normally not
 used on it's own, but as a dependency of python3.5-minimal.

Package: sed
Essential: yes
Status: install ok installed
Priority: required
Section: utils
Installed-Size: 799
Maintainer: Clint Adams <clint@debian.org>
Architecture: amd64
Multi-Arch: foreign
Version: 4.4-1
Pre-Depends: libc6 (>= 2.14), libselinux1 (>= 1.32)
Description: GNU stream editor for filtering/transforming text
 sed reads the specified files or the standard input if no
 files are specified, makes editing changes according to a
 list of commands, and writes the results to the standard
 output.
Homepage: https://www.gnu.org/software/sed/

Package: cloud-init
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 2036
Maintainer: Debian Cloud Team <debian-cloud@lists.debian.org>
Architecture: all
Version: 20.2-2~deb10u1
Depends: fdisk | util-linux (<< 2.29.2-3~), gdisk, ifupdown, locales, lsb-base, lsb-release, net-tools, procps, init-system-helpers (>= 1.18~), python3-configobj, python3-jinja2, python3-jsonpatch, python3-jsonschema, python3-oauthlib, python3-requests, python3-yaml, python3:any (>= 3.3.2-2~)
Recommends: cloud-guest-utils, eatmydata, sudo
Suggests: btrfs-progs, e2fsprogs, xfsprogs
Conffiles:
 /etc/NetworkManager/dispatcher.d/cloud-init-hook-network-manager 5fe06610f28360e90a8c04febddd384b
 /etc/cloud/cloud.cfg 6799782aa56d6a53656becc50c956555
 /etc/cloud/cloud.cfg.d/00_debian.cfg 708307751e5df58dca385de5845777fb
 /etc/cloud/cloud.cfg.d/05_logging.cfg aaed6d73c960381f36743c24a1603aab
 /etc/cloud/cloud.cfg.d/README f5175bd4df5c37ce781f93d20f59561a
 /etc/cloud/templates/chef_client.rb.tmpl 162f5c6b365338e9905cbce06c58c073
 /etc/cloud/templates/chrony.conf.debian.tmpl f6afc8fb02df02a7fad7672a67d34320
 /etc/cloud/templates/chrony.conf.fedora.tmpl 8f56d3a782ade6693badf3832775fc82
 /etc/cloud/templates/chrony.conf.opensuse.tmpl b7ff0b11f9bded1fc0be5f8806152541
 /etc/cloud/templates/chrony.conf.rhel.tmpl 65413a48dedb31d23c93ac417e1a35e8
 /etc/cloud/templates/chrony.conf.sles.tmpl b7ff0b11f9bded1fc0be5f8806152541
 /etc/cloud/templates/chrony.conf.ubuntu.tmpl 1ce60fc8d7ab2a82cdf3e572fb9709ff
 /etc/cloud/templates/hosts.debian.tmpl 0f19ecd06c3e71f7c8ee1e864b0e22e9
 /etc/cloud/templates/hosts.freebsd.tmpl 4b24f77244877db02fa3cccef97b0827
 /etc/cloud/templates/hosts.redhat.tmpl bd5a1edd50c1d8b27c5f51ed44040c19
 /etc/cloud/templates/hosts.suse.tmpl 40c33f8cb1c8c4cd1e8c7571303f1346
 /etc/cloud/templates/ntp.conf.debian.tmpl 4234ee67d84a3da62e0d97c7329668df
 /etc/cloud/templates/ntp.conf.fedora.tmpl eb6d3fe3d4ddebfe0e310843e8bbc82b
 /etc/cloud/templates/ntp.conf.opensuse.tmpl e4bb5100b2dc442b6237ac7e1635acaa
 /etc/cloud/templates/ntp.conf.rhel.tmpl 3437363e2f2dd82c94f8c787fc957ee8
 /etc/cloud/templates/ntp.conf.sles.tmpl e4bb5100b2dc442b6237ac7e1635acaa
 /etc/cloud/templates/ntp.conf.ubuntu.tmpl 645795fb4ef5d9801111f7d1eb27d91d
 /etc/cloud/templates/resolv.conf.tmpl a9abad52f1e21f337f223978b2605127
 /etc/cloud/templates/sources.list.debian.tmpl fffcef4f450068888000cc368fb1c5d9
 /etc/cloud/templates/sources.list.ubuntu.tmpl b9f68f7e572d59a2af0c9758bc2ed1f2
 /etc/cloud/templates/timesyncd.conf.tmpl 9c6b3af8058efc219987863f45bb9198
 /etc/dhcp/dhclient-exit-hooks.d/hook-dhclient aa6f407b6895c130f2809755373e739f
 /etc/init.d/cloud-config 5be7f09acfb69f71526a9c6c23c31e32
 /etc/init.d/cloud-final 15fc2d68231ce0929139589910314d99
 /etc/init.d/cloud-init 81e6e95a2d2c8a45ea5b1ac4bc11e491
 /etc/init.d/cloud-init-local 9bbb2ee504e1d08b1433fb85795bab7f
 /etc/profile.d/Z99-cloud-locale-test.sh ca1c7cfa9cf8f9192f3d44f74708e01f
 /etc/rsyslog.d/21-cloudinit.conf d4cf2e5d3cb9914cf7e6cdc08d298339
Description: initialization system for infrastructure cloud instances
 Cloud-init provides a framework and tool to configure and customize virtual
 machine instances for Infrastructure-as-a-Service (IaaS) clouds platforms. It
 can for example set a default locale and hostname, generate SSH private host
 keys, install SSH public keys for logging into a default account, set up
 ephemeral mount points, and run user-provided scripts.
 .
 Various methods are supported for passing data to the instance at launch
 time, including the standard interfaces of multiple platforms.
Homepage: https://launchpad.net/cloud-init

Package: libsmartcols1
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 257
Maintainer: Debian util-linux Maintainers <ah-util-linux@debian.org>
Architecture: amd64
Multi-Arch: same
Source: util-linux
Version: 2.29.2-1+deb9u1
Depends: libc6 (>= 2.17)
Description: smart column output alignment library
 This smart column output alignment library is used by fdisk utilities.

Package: libcryptsetup4
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 217
Maintainer: Debian Cryptsetup Team <pkg-cryptsetup-devel@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: same
Source: cryptsetup
Version: 2:1.7.3-4
Depends: libc6 (>= 2.17), libdevmapper1.02.1 (>= 2:1.02.97), libgcrypt20 (>= 1.7.0), libuuid1 (>= 2.16), libgpg-error0 (>= 1.10-0.1)
Description: disk encryption support - shared library
 Cryptsetup provides an interface for configuring encryption on block
 devices (such as /home or swap partitions), using the Linux kernel
 device mapper target dm-crypt. It features integrated Linux Unified Key
 Setup (LUKS) support.
 .
 This package provides the libcryptsetup shared library.
Homepage: https://gitlab.com/cryptsetup/cryptsetup

Package: netbase
Status: install ok installed
Priority: important
Section: admin
Installed-Size: 44
Maintainer: Marco d'Itri <md@linux.it>
Architecture: all
Multi-Arch: foreign
Version: 5.4
Conffiles:
 /etc/protocols bb9c019d6524e913fd72441d58b68216
 /etc/rpc f0b6f6352bf886623adc04183120f83b
 /etc/services 567c100888518c1163b3462993de7d47
Description: Basic TCP/IP networking system
 This package provides the necessary infrastructure for basic TCP/IP based
 networking.

